Agilent 1200 Series Hip-ALS High Performance Autosampler (G1367B)
Experience exceptional efficiency and reliability with the Agilent 1200 Series Hip-ALS High Performance Autosampler (G1367B). Designed for laboratories demanding high sample throughput, this autosampler delivers rapid injection cycles while providing unparalleled flexibility in sample handling.
Key Features:
- Injection Volume Versatility: Offers a standard injection range from 0.1 to 100 µl in 0.1 µl increments, expandable up to 1500 µl with optional multi-draw hardware modifications.
- High Precision: Achieve typically < 0.25% RSD for volumes between 5 – 100 µl and < 1% RSD for variable volumes from 1 – 5 µl, ensuring accurate results in every analysis.
- Rapid Injection Cycle Time: Perform injections in less than 30 seconds under standard conditions, optimizing laboratory workflow.
Specifications:
- GLP Features:
- Early Maintenance Feedback (EMF) for proactive upkeep.
- Electronic records for maintenance and error tracking.
- Communication Capabilities:
- Integration via Controller-area network (CAN) and RS232C connections.
- APG-remote standard features included.
- Optional four external contact closures and BCD vial number output for enhanced connectivity.
- Safety Features:
- Leak detection systems with safe handling protocols.
- Designed with low voltages in maintenance areas for user safety.
- Error detection and display for immediate troubleshooting.
- Pressure and Viscosity:
- Operates effectively at a pressure range of 400 bar (5880 psi).
- Handles sample viscosities between 0.2 and 5 cp.
- Sample Capacity:
- Accommodates up to 2 well plates (MTP) and 10 × 2 ml vials.
- Stores 108 × 2-mL vials in 2 × 54 vial plate configurations, along with 10 additional 2 mL vials.
- Compatible with Eppendorf tubes (0.5/1.5/2.0 mL) in various configurations.
- Expandable with the Agilent 1200 Series sample capacity extension for additional sample handling options.
- Carry-Over Performance:
- Demonstrates typically < 0.01% carry-over using specified conditions, ensuring analytical integrity.
- Test conditions include a column of 125 x 4 mm Hypersil ODS, mobile phase of Water/Acetonitrile (80/20), with flow rate at 1 ml/min.
- Uses 1 µl caffeine injection for carryover tests, with a 20-second needle wash performed before injection using the flush port.
