Amplifier Research 200S1G6 Broadband Amplifier, 0.7 GHz - 6 GHz, 200W

Amplifier Research 200S1G6 Broadband Amplifier

The Amplifier Research 200S1G6 is a high-performance broadband amplifier designed for applications that necessitate instantaneous bandwidth, superior gain, and exceptional linearity. With its solid-state, Class A design and self-contained air-cooled structure, this amplifier is an essential tool for any laboratory setting. While it is ideal for benchtop use, it can be easily removed from its elegant cabinet for installation in standard equipment racks.

Key Features:

• Delivers a minimum of 200 watts of RF power when paired with a sweep generator.
• Convenient front panel gain control for precise output level adjustments.
• Equipped with an RF input leveling circuit to protect against RF input overdrive, controlling levels above 0 dBm.
• Over-temperature protection automatically disconnects DC voltage to stages in the event of cooling blockage or fan failure.
• Digital display indicates operational status and fault conditions, facilitating quick troubleshooting.
• Remote operation capabilities with GPIB/IEEE-488, RS-232, fiber optic, USB, and Ethernet interfaces.
• Local/Remote switch ensures clear control during operation.
• Applications:
• Ideal as a driver amplifier for testing wireless and communication components and subsystems.
• Versatile testing tool covering multiple frequency bands.
• Compatible with various communication technologies, including CDMA, W-CDMA, TDMA, and GSM.
• Perfect for EMC test applications requiring undistorted modulation envelopes.

Specifications:

• Rated power output: Minimum 200 watts (0.7-6.0 GHz)
• Input for rated output: Maximum 1.0 milliwatt
• Power output at 3dB compression:
  • Nominal: 220 watts
  • Minimum: 180 watts
• Power output at 1dB compression:
  • Nominal: 180 watts
  • Minimum: 160 watts
• Small signal gain flatness:
  • Typical: ±1.5 dB
  • Maximum: ±2.5 dB
• Frequency response: 0.7 - 6 GHz instantaneously
• Gain (maximum setting): Minimum 54 dB
• Gain adjustment: Continuous range of at least 10 dB (4096 steps remote)
• Input impedance: 50 ohms, VSWR 2.0:1 maximum
• Output impedance: Nominal 50 ohms
• Mismatch tolerance: Operates without damage or oscillation, handling any magnitude and phase of source and load impedance at rated power.
• Modulation capability: Accurately reproduces AM, FM, or pulse modulation on input signals.
• Third order intercept: Typically 60 dB
• Noise figure: Typically 10 dB
• Harmonic distortion:
  • Max: -20 dBc at 180 watts (1.0-6.0 GHz)
  • Typical: -15 dBc at 180 watts (0.7-1.0 GHz)
• Spurious level: Typically -73 dBc
• Phase linearity: ± 1.0 deg/100 MHz typical
• Primary power: Automatically selected:
  • 90-132 VAC, 180-264 VAC
  • 50/60 Hz, single phase
  • 1900 watts maximum
• Connectors:
  • RF: Type N female
  • Remote interfaces:
    • IEEE-488: 24 pin
    • RS-232: 9 pin Subminiature D
    • RS-232 (fiber optic): Type ST
    • USB 2.0: Type B
    • Ethernet: RJ-45
• Safety interlock: 15 pin Subminiature D
• Cooling: Forced air (self-contained fans)