Amplifier Research 60S1G4A Microwave Amplifier, 0.7 - 4.2 GHZ, 60W

AMPLIFIER RESEARCH 60S1G4A - Rent for Your High-Powered RF Needs (Call for Availability)

The Amplifier Research 60S1G4A sets a new standard in high-performance RF amplification. Designed with cutting-edge solid-state technology, this self-contained, air-cooled broadband amplifier is ideal for applications demanding instantaneous bandwidth, exceptional gain, and remarkable linearity. Its sleek benchtop housing can be conveniently adapted for rack mounting, providing versatility in various settings.

Key Features of the Amplifier Research 60S1G4A:

• RF Power Output: Delivers a minimum of 60 watts when paired with a sweep generator, ensuring robust performance.
• Front Panel Gain Control: Easily adjust your output level to suit specific project requirements.
• RF Input Leveling Circuit:
  • Protects the first stage from RF input overdrive, enhancing reliability.
  • Automatically adjusts to maintain optimal input levels.
• Over-Temperature Protection: Prevents damage by disconnecting DC voltage during cooling failures.
• Digital Display: Provides real-time indications of operating status and detects fault conditions.
• Remote Access: All control functions and status indications are accessible via GPIB/IEEE-488, RS-232, USB, Ethernet, and fiber optic interfaces.
• Local/Remote Switch: Ensures seamless transition between local and remote control operations.

Specifications of the Amplifier Research 60S1G4A:

• Rated Power Output: 60 watts minimum
• Input for Rated Output: 1.0 milliwatt maximum
• Power Output @ 3 dB Compression:
  • Nominal: 70 watts
  • Minimum: 60 watts
• Power Output @ 1 dB Compression:
  • Nominal: 65 watts
  • Minimum: 50 watts
• Frequency Response: 0.7 – 4.2 GHz instantaneous
• Gain (Maximum Setting): 47.8 dB minimum
• Gain Adjustment: Continuous range of at least 10 dB (4096 steps remote)
• Input Impedance: 50 ohms, VSWR 2.0:1 maximum
• Output Impedance: 50 ohms nominal
• Mismatch Tolerance: 100% rated power without foldback; safely operates with any source and load impedance combination.
• Modulation Capability: Accurately reproduces AM, FM, or pulse modulation signals.
• Third Order Intercept Point: 58 dBm typical
• Noise Figure: 10 dB typical
• Harmonic Distortion: -20 dBc maximum at 60 watts
• Spurious Emissions: -73 dBc typical
• Phase Linearity: ±1.0 deg / 100 MHz typical
• Primary Power: Automatically selects between 90-132 or 180-264 VAC, 50/60 Hz, single phase, with a maximum draw of 410 watts.
• Connectors:
  • RF: Type N female
  • Remote Interfaces:
    • IEEE-488: 24 pin
    • RS-232: 9 pin Subminiature D
    • RS-232 (fiber optic): Type ST
    • USB 2.0: Type B
    • Ethernet: RJ-45
• Safety Interlock: 15 Pin Subminiature D
• Cooling: Forced air with self-contained fans for consistent performance.