Chroma 62015B-80-18 DC Power Supply Module

RENT CHROMA 62015B-80-18 (call for availability)

The Chroma 62015B-80-18 DC Power Supply Module is a powerful solution tailored for demanding burn-in applications including LCD panels, DC-DC converters, power inverters, notebook computers, and battery chargers. With its exceptional power density and minimal current ripple, this module provides a cost-effective option for various electronic devices. Equipped with modern power factor correction circuitry, it adheres to IEC standards for enhanced reliability.

Key Features

• N+1 Redundancy
• Hot-Swappable Maintenance
• Ideal for Burn-in and Plating
• High Power Applications with CSU
• Remote Sense
• Remote ON / OFF
• CAN Bus Control
• DC OK Signal Output
• Voltage range: 1 ~ 80V
• Current range: Up to 2000A (System)
• Power range up to 1.5KW per module, up to 120KW per system
• High Power Density: 464 mW/cm³ (7.13 W/In³)

Specifications

Electrical Specifications:

• Output Ratings:
  • Output Power: 1440W
  • Output Voltage: 1~80V
  • Output Current: 1~18A
• Line Regulation: 0.1% FS
• Load Regulation: 1% FS
• Programming Accuracy: 1% FS
• Measurement Accuracy: 1% FS
• Output Noise (20MHz):
  • Voltage Noise (P-P): 200mV
  • Voltage Ripple (rms): 50mV
  • Current Ripple (rms): 0.18A
• Efficiency: > 88% @ full load
• Turn On Over Shoot Voltage: 5% of nominal output (Rise Time of 100ms)
• Transient Response Time: < 5 ms
• AC Input Voltage:
  • Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection)/ 45 ~ 65 Hz
  • Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz
  • Input Power Factor: > 0.98 @ full load

Protection Functions:

• OVP: Automatically shuts down at 115% of set value
• Adjustment Range: 1~83V
• OCP: Current limit (0 ~ 100%) / OCP Shutdown at 115% of F.S.
• OTP: Automatically shuts down if internal limit is reached

I/O Signal:

• Remote ON/OFF (I/P): Dry contact (closed = enabled)
• AUX Voltage: 4 ~ 24V / 0.5A at mainframe (adjustable voltage)
• DC OK Signal Type (O/P): Dry contact (closed = enabled) (Error: OVP / OCP / OTP / AC Fault)

Programming Response Time:

• Rise Time (Full Load): 100ms for a programmed 5% to 95% step in output voltage
• Fall Time (Full Load): 40ms for a programmed 95% to 5% step in output voltage

General Specifications:

• Remote Sensing: 3V maximum line loss compensation
• Parallel Operation: Current Sharing (±5%)
• Operating Temperature: 0 ~ 50°C
• Humidity Range: 0 ~ 90% RH, Non-condensing
• Remote Interface: CAN Bus (optional)
• Safety & EMC: CE