Chroma 62024P-100-50 Programmable DC Power Supply, 100V, 50A, 2400W

CHROMA 62024P-100-50 POWER SUPPLY

The Chroma 62024P-100-50 Programmable DC Power Supply streamlines your testing needs by offering both high voltage/low current and low voltage/high current operations within a single robust instrument. Designed for efficiency, this power supply reduces the physical footprint of laboratory setups by minimizing the number of necessary devices, making it ideal for Automated Test Equipment (ATE) and benchtop applications.

With cutting-edge features for precision, the Chroma 62024P-100-50 delivers accurate readbacks of output voltage and current, as well as output trigger signals. Its innovative capacity to create complex DC transient waveforms fortifies your ability to test devices under varied conditions, such as voltage spikes and drops, making it particularly advantageous for testing DC-DC converters and similar components.

Features and Specifications of the Chroma 62024P-100-50 Programmable DC Power Supply

• Features:
  • Wider operating range of voltage and current within the specified power rating.
  • High-speed programming capabilities.
  • Precision Voltage and Current measurements.
  • Current sharing capability for parallel operation through Master/Slave Control.
  • Optional LXI compliance for advanced connectivity.
  • Constant Power Operating Envelope:
    • Provides higher currents at lower voltages.
    • Reduces the need for multiple conventional supplies, allowing one unit to perform the tasks of two or three.
    • Eliminates the necessity for both high-current/low-voltage and low-current/high-voltage supplies to accommodate a range of converters.
  • High Accuracy Current Readback:
    • Eliminates the need for current shunts or multiplexers to achieve accurate input current measurements.
    • Facilitates less complex, more cost-effective workbenches and test systems covering a broader range of converters.
  • DC Transients:
    • Programmable control over voltage and current rise and fall times.
    • Generates complex DC transients that conventional power supplies cannot support.
    • Supports automotive transient testing conforming to ISO16750-2 and shipboard testing per DO-160 standards.
  • Output Trigger:
    • Provides precision event capturing and output trigger timing.
    • Perfect for ATE systems aimed at capturing oscilloscopic waveforms.
  • VID Control:
    • Instruments include 8 independent programmable TTL signals for VID control and general-purpose logic controls.
  • Soft Panels:
    • Advanced LabVIEW graphical control panels for simple control and data gathering.
• Specifications:
  • Output Ratings:
    • Output Voltage: 0~100V
    • Output Current: 0~50A
    • Output Power: 2400W
  • Line Regulation:
    • Voltage: 0.01% + 10mV
    • Current: 0.01% + 12mA
  • Load Regulation:
    • Voltage: 0.01% + 18mV
    • Current: 0.01% + 28mA
  • Voltage Measurement:
    • Range: 20V / 100V
    • Accuracy: 0.05% + 0.05% F.S.
  • Current Measurement:
    • Range: 10A / 50A
    • Accuracy: 0.1% + 0.1% F.S.
  • Output Noise (0-20MHz):
    • Voltage Ripple (P-P): 100 mV
    • Voltage Ripple (ms): 15 mV
    • Current Ripple (ms): 20 mA
  • OVP Adjustment Range: 110% of Vset to 110% of Vmax
  • Slew Rate Range:
    • Voltage (with USB): 0.001V - 10V / ms
    • Current (with USB): 0.001A - 1A / ms
  • Programming Response Time:
    • Rise Time (Full & No Load): 10 ms
    • Fall Time: 300 ms (max)
  • Efficiency: 0.85
  • Drift (8 hours):
    • Voltage: 0.02% of Vmax
    • Current: 0.04% of Imax
  • Temperature Coefficient:
    • Voltage: 0.02% of Vmax / °C
    • Current: 0.04% of Imax / °C
  • Transient Response Time: 3ms
    • 10% Step Change: 250 mV
    • Voltage Limit @ Series Mode: 500V
  • AC Input Voltage Ranges: 190 to 250Vac (single phase)