Chroma 62024P-80-60 Programmable DC Power Supply

The Chroma 62024P-80-60 is a cutting-edge programmable DC power supply, offering a unique constant power operating envelope that enables the delivery of high voltage/low current as well as low voltage/high current from a single instrument. This innovative design streamlines equipment needs in both Automated Test Equipment (ATE) environments and benchtop applications, minimizing the number of power supplies required for complex testing scenarios.

Key Features

• Versatile Output: Accommodates a wide range of voltage and current settings within its rated power.
• High-Speed Programming: Ensures rapid configuration for testing needs.
• Precision Measurements: Provides highly accurate readback of output voltage and current.
• Current Sharing: Supports parallel operations utilizing Master/Slave control for enhanced power distribution.
• LXI Option: Ready for integration into advanced networking systems for remote operations.
• Constant Power Operating Envelope:
  • Delivers higher currents at lower voltages.
  • Eliminates the need for multiple power supplies; a single unit can replace two or three conventional supplies.
  • Streamlined testing for a wide range of converters without compromising on performance.
• High Accuracy Current Readback:
  • Avoids the need for external current measurement devices, reducing system complexity and costs.
  • Broadens application coverage for different types of converters through simplified setups.
• DC Transients:
  • Programmable control over voltage and current rise/fall times for dynamic testing scenarios.
  • Enables the generation of complex DC transients not achievable with standard supplies, supporting automotive and shipboard testing standards.
• Output Trigger:
  • Facilitates precise event capturing, perfect for ATE systems that require waveform analysis with oscilloscopes.
• VID Control: Eight independent programmable TTL signals for versatile logic control applications.
• Soft Panels:
  • Equipped with advanced LabVIEW graphical interfaces for seamless operation and data collection.

Specifications

• Output Ratings:
  • Output Voltage: 0~80V
  • Output Current: 0~60A
  • Output Power: 2400W
• Line Regulation:
  • Voltage: 0.01% + 8mV
  • Current: 0.01% + 10mA
• Load Regulation:
  • Voltage: 0.01% + 12mV
  • Current: 0.01% + 20mA
• Voltage Measurement:
  • Range: 16V / 80V
  • Accuracy: 0.05% + 0.05% F.S.
• Current Measurement:
  • Range: 12A / 60A
  • Accuracy: 0.1% + 0.1% F.S.
• Output Noise (0-20MHz):
  • Voltage Ripple (P-P): 100 mV
  • Voltage Ripple (ms): 10 mV
  • Current Ripple (ms): 30 mA
• OVP Adjustment Range: 110% of Vset to 110% of Vmax
• Slew Rate Range:
  • Voltage (USB): 0.001V - 10V/ms
  • Current (USB): 0.001A - 1A/ms
• Programming Response Time (Typical):
  • Rise Time (Fully Loaded): 8 ms
  • Fall Time: 240 ms (max)
• Efficiency: 85%
• Drift (8 hours):
  • Voltage: 0.02% of Vmax
  • Current: 0.04% of Imax
• Temperature Coefficient:
  • Voltage: 0.02% of Vmax / °C
  • Current: 0.04% of Imax / °C
• Transient Response Time: 3ms
  • 10% Step Change: 250 mV
  • Voltage Limit (Series Mode): 400V
• AC Input Voltage Ranges: 190 to 250Vac (Single Phase)