Drager Air-Shields Isolette C2000 Infant Incubator

Drager Air-Shields Isolette C2000 Infant Incubator
The Drager Air-Shields Isolette C2000 Infant Incubator is engineered to support the delicate needs of low birth weight neonates by providing a safe and nurturing thermal-neutral environment. This advanced incubator is specifically designed to enhance neonatal care, ensuring optimal conditions for vulnerable infants.
Key Features:

• Optional Dual Access Doors: Accessible from either side, these doors streamline care procedures and improve ease of access for medical staff.

• Thermal Performance: The patented dual air curtains minimize radiant heat loss, ensuring that infants remain warm. The bi-directional airflow system effectively stabilizes temperature, even when doors are opened.

• Large Mattress and Dual Probes: Designed for the simultaneous care of twins, the C2000 allows you to provide support for more patients in a single unit.

• Quiet Operation: With an internal noise level of 47dBA or less, this incubator creates a calm environment conducive to healing for both infants and caregivers.

• Optional In-bed Scale: Weighing the infant can be done within the incubator, maintaining a warm environment and minimizing disturbances during routine checks.

• 24-hour Data Trends: The C2000 incubator provides comprehensive record-keeping for essential parameters, including air and skin temperature, humidity levels, oxygen concentration, heater power, and changes in weight.

Ideal for neonatal intensive care units, the Drager Isolette C2000 facilitates high-quality care, enhancing the safety and comfort of critical pediatric patients. Enhance your neonatal care capabilities with this state-of-the-art incubator, designed for the challenges of modern medical practices.

Drager Air-Shields Isolette C2000 Infant Incubator Specifications

Air-Shields Incubator with VHA Stand

• Width: 38.0" (99 cm)

• Depth: 26.3" (67 cm)

• Height: 52.5" - 60" (133.4 to 152.4 cm)

• Weight: 198 lbs (90 kg)

Air-Shields Incubator with Fixed Height Stand

• Width: 46.8" (119 cm)

• Depth: 26.3" (67 cm)

• Height: 56" (142 cm)

• Weight: 175 lbs (79.5 kg)

Hood Specifications

• Mattress tray size: 16" x 32" (40.6 x 81 cm)

• Mattress to hood distance: 16.25" (41.2 cm)

• Access panel opening: 11" (28 cm)

• Standard hood includes: 4 port doors; 2 iris ports; front access panel; 3 left and 3 right tubing grommets - front

• Mattress tilt: ±12° (±1° C)

• Micro air intake filter: 99.9% efficiency

• Particle size removal: 0.3 micron

• Air mode control range: 20 to 39.0°C

• Air mode override: >37.0°C

• Air flow velocity across mattress: <10 cm/sec

• Skin mode control range: 34.0 to 38.0°C

• Skin mode override: >37.0°C

• Temperature rise time (at 22°C ambient): <35 minutes

• CO2 levels: <0.5% when delivered at 750 ml/min at a point 10 cm above the mattress

• Operating noise level in hood: 47 dBA (49 dBA with Servo Controlled Oxygen)

• Casters: 4 casters (1 steering), 5" (12.7 cm)

• RS-232 output

• Controller Display: LCD with brightness control

• Selectable color combinations: White on blue background (default) or yellow on black background

• Dual-skin temperature monitoring

• 6 AC (Mains) outlets

• Keypad lock

• 24-hour trend monitoring: Air temperature, skin temperature (1 and 2), Relative humidity, Oxygen concentration, Heater power

Environmental Requirements

• Operating temperature range: 20°C to 30°C ambient

• Storage temperature range: -25°C to 60°C ambient

• Operating humidity range: 5% RH to 99% RH, non-condensing

• Storage humidity range: 0% to 99% RH, non-condensing

• Operating RH sensor temperature range: 20°C to 41°C

• Operating O2 sensor temperature range: 20°C to 41°C

• O2 sensor calibration pressure: 600 to 900 mm Hg

Alarms

• Temperature limits: 38°C for air temp. < 37°C; 40.0°C for air temp. > 37°C

• Baby set temperature alarm: ±1°C (or ±0.5°C)

• Air set temperature alarm: +1.5°C/-2.5°C

High/Low Skin Temperature Alarms

• High/low air temperature

• High temperature cut-out

• Air probe failure

• Skin probe failure/disconnect

• Low air flow

• Low humidity (humidity option)

• Low/high oxygen (±3%) (oxygen option)

• Oxygen calibration required (oxygen option)

• Oxygen cell difference (oxygen option)

• Oxygen solenoid failure (oxygen option)

• Scale disconnect (scale option)

• Too much weight (scale option)

System Alarms

• Controller failure

• Sensor module failure

• Sensor module out of position

• Motor failure

• Power failure

• Heater failure

• Sensor disconnected

• Key stuck

Servo Humidity Option

• Water capacity: 1000 ml

• Refill time: >24 hrs at 85% RH

• Range: 30 to 95%

• Display accuracy: ±6% RH

Servo Oxygen Option

• Accuracy: 100% calibration ±3%; 21% calibration ±5%

• Range: 21 to 65%

• Resolution: 1%

Scale Option

• Weight range: 0 to 15.4 lbs (0 to 7 kg)

• Weight display resolution: 1 g or 1 oz (OIML = 10 g or 1 oz)

• Weight accuracy: 2 g ± 1/2 digit up to 2 kg (OIML = 10 g); 5 g ± 1/2 digit over 2 kg

• Weight gain or loss trending: Over 7 days

Other Options (Attach to Accessory Rail)

• IV Pole weight limit: 10.4 lbs (4.72 kg)

• Monitor shelf weight limit: 25 lbs (11.4 kg)

• Rear access door: Provided with 2 port doors and 4 additional hood grommets (2 left and 2 right)

• Ventilator tube support

• Oxygen tank mount

Drawer Options

• Large deep swivel type

• Two shallow swivel out type

How can we help you with today?