Haefely PIM100 - High-Voltage Impulse Module

The Haefely PIM100, a pivotal component of the PSURGE 8000 Surge Platform System, excels in enhancing surge testing capabilities for AC and DC power lines. This advanced Impulse Module integrates seamlessly with Coupling/Decoupling Networks (CDNs), enabling the simultaneous testing of multiple impulse modules through multiplexed inputs, thereby optimizing your testing procedures.

Engineered to comply with international standards, the Haefely PIM100 adheres to IEC 61000-4-5 and ANSI C62.41, providing precise Combination Wave and Hybrid generation with defined open and short circuit waveforms specifically suited for testing power systems.

Key Features:

• Floating high voltage output for versatile application.
• Combination wave generation with a rate of 1.2/50µs and 8/20µs.
• Output voltage capability of up to 7.4kV with a maximum impulse current of 3.7kA.
• Built-in voltage and current monitors to ensure accurate impulse shape verification.
• Accurate phase angle synchronization, allowing impulses to be applied with ±1° precision.

Safety and Reliability:

• High Voltage connections are integrated into the System Safety Concept, ensuring operator safety by preventing exposure to hazards.
• Interlocked HV section and integrated controller streamline testing processes while prioritizing safety.
• Durably built with carefully selected components to withstand rigorous testing protocols.

Efficiency and Automation:

• Eliminates the need for a control computer through programming capabilities for IEC and ANSI standards.
• Automated report generation provides instant feedback without demanding additional computer resources.
• Quickly transfer test loads via PCD 100 or 130, allowing for continuous testing without power interruptions to the Equipment Under Test (EUT).

Applications:

• Applicable for single and three-phase power line systems.
• Compliance testing with IEC 61000-4-5 (Edition 1 and 2) for power and data lines.
• Adheres to ANSI C62.41 standards for various power line applications.
• Covers many IEC and EN product standards and meets various international requirements for Hybrid impulses.

Specifications:

• Impulse Voltage Range: 0.20 – 7.4kV ±10%
• Impulse Current Range: 0.10 – 3.7kA ±10%
• Source Impedance: 2 Ohms
• Repetition Rate: 10 seconds / 6 per minute at maximum voltage
• Line Synchronisation: 1° steps ±1° @50Hz
• Impulse Front Time: V= 1.2µs ±30% & I= 8µs ±20%
• Impulse Duration: V= 50µs ±20% & I= 20µs ±20%
• Monitor Outputs: BNC connections for voltage (750/1) and current (400A/V)
• Impulse Polarity: Both Positive and Negative
• High Voltage output connector with integrated safety circuit.