RENT Haefely PIM150 (call for availability)
The Haefely PIM150, integrated with the PSURGE 8000 Surge Platform, provides comprehensive programming capabilities essential for IEC and ANSI testing, eliminating the necessity for a dedicated control computer. This advanced device boasts voltage monitor circuits that facilitate swift verification of impulse shape and amplitude, along with peak measurement circuits that assist in evaluating EUT PASS/FAIL criteria.
According to IEC 61000-4-12 and ANSI C37.90, the Haefely PIM150 features an oscillating wave generator with specific open circuit waveform parameters. The damped sine wave is vital for testing the immunity of electronic relays and relay systems, particularly in challenging environments such as electrical substations.
Prioritizing safety, the Haefely PIM150 incorporates high voltage connections designed to prevent accidental contact. Touch-proof connectors are utilized in the CDN input and output terminals, ensuring operator safety during testing.
Enhancing functionality, the integrated Coupling/Decoupling Network (CDN) allows for the effective superimposition of impulses on AC and DC power lines. It ensures that wave shape integrity is maintained at the test system output, with consistent wave shape and amplitude even when multiple coupling paths are selected.
Integrated with the WinFEAT&R control and reporting software package, the Haefely PIM150 streamlines setup and operation, allowing the transfer of test load data to a computer for optimized resource management.
Key Features of the Haefely PIM150 Oscillating Wave Surge Module:
- Frequency options of 100kHz & 1MHz
- Impressive 3.3kV impulse voltage capability
- Source impedance of 200 Ohm
- Adjustable burst duration
Highlights of the Haefely PIM150:
- International application, designed to meet and surpass the requirements of IEC, EN, and ANSI tests for power line applications.
- Accurate impulses, guaranteed waveform and amplitude conformance at the CDN output, enabling simultaneous multiple coupling path selections.
- Designed for safety and ease of use, featuring an interlocked high voltage section and specially designed output sockets.
- Constructed for durability, with meticulous component selection for reliable operation under rigorous testing conditions.
- Automated report generation capabilities without a computer, complemented by the option to utilize WinFEAT&R software for data collection in various formats.
Applications of the Haefely PIM150 Oscillating Wave Surge Module:
- Single & three-phase power line systems
- IEC 61000-4-12 Power & data line testing
- ANSI C37.90.1-2002 compliance for power lines
- IEC 60255-22-1 relay and protection equipment testing
- IEEE 1613 for substation equipment testing
Specifications of the Haefely PIM150:
- Impulse voltage range: 0.25 – 3.3kV
- Burst frequency: 100kHz & 1MHz
- Impulse repetition rates: 40 Hz & 400Hz
- Source impedance: 200 ohms
- Burst duration: Adjustable from 2 seconds to continuous
- Damping rate: 50% Vpk between the 5th and 10th peak
- EUT voltage: 480Vac (phase-to-phase) / 110Vdc
- EUT current capacity: 16A ac/dc per path
- Impulse coupling options: Single & multiple paths
- Impulse polarity: Positive, negative, & alternating
- Impulse output: High voltage connector & CDN
- EUT safety switch: 16A thermo-magnetic
- Monitor output: BNC, voltage (500 / 1)
