HAEFELY PSURGE 4010 Combination Wave Surge Generator

RENT HAEFELY PSURGE 4010 Generator (call for availability)

The Haefely PSURGE 4010 Combination Wave Surge Generator offers a comprehensive testing solution designed to ensure the reliability and performance of electrical equipment under surge voltage transients caused by switching operations and lightning effects. This advanced generator is compliant with key international standards, including:

• IEC / EN 61000-4-5 Edition 1 and 2
• EN 61000-6-1
• EN 61000-6-2

Key Features

• Combination Wave Voltage:
  • 1,2/50µs
  • Current: 8/20µs
• Impulse Voltage: 200V to 4.2kV
  • Impulse Current: 100A to 2.1kA
  • Maximum impulse repetition rate: 12 per minute
  • Positive, negative, and user-definable alternating polarity
  • Integrated CDN for 16A at 264Vac and 110Vdc
  • Impulse voltage, current, and EUT current measurement
  • Test parameter ramp functions
  • Phase angle synchronization
  • 18 test and 18 program memory locations
  • Remote control capabilities using WinFEAT® software

Benefits

• Totally reproducible test results
• Consistent pulse parameters
• Fully automatic execution of complex test routines and sequences
• Cost-effective testing solution
• Expandable to 3-phase testing with optional FP-SURGE 32.1
• Expandable for impulse magnetic field testing (IEC 61000-4-9) with MSURGE add-on

Technical Specifications

• Waveshape: 1,2/50µs and 8/20µs as per IEC 61000-4-5
• Impulse Voltage: 200V to 4.2kV
• Impulse Current: 100A to 2.1kA
• Impulse Repetition: Up to 12 per minute
• Impulse Polarity: Positive, Negative, Alternating
• Power Supply: 85V to 264V, 50/60Hz
• Internal Single-Phase CDN:
  • Max. AC power: 264V / 16A, 50-60Hz on Schuko plug
  • Max. DC power: 110V / 16A
  • Coupling mode: 18µF and 9µF + 10Ω as per IEC 61000-4-5

User-Friendly Features

• Programmable and variable parameters tailored for development and quality engineers
• Permanent storage of tests and programs
• Alphanumeric input and multi-mode LCD display
• Direct test report generation to a printer without needing an external computer
• Easy remote control programming with an external computer via WinFEAT® software

Safety and Quality Enhancements

• Solid-state high voltage switch ensures highly reproducible test results
• Integrated current-protected coupling-decoupling network
• Decoupling inductors maintain the integrity of the impulse waveform
• High-performance peak measurement systems for impulse voltage and current
• Safety and emergency stop circuits for enhanced personnel protection

Flexibility in Operations

• Fully automatic test sequence execution
• Equipment Under Test (EUT) failure detection and protection through programmable current limits
• Integrated "EUT Failed" input connector for prompt fault identification
• Centronix interface for printer connectivity
• RS-232 serial interface for external computer operation
• Options for expansion into an automatic 3-phase system
• Capability to satisfy IEC 61000-4-9 requirements with optional coil antenna