IFI T62-100 TWT Amplifier
Rent IFI Instruments T62-100 TWT Amplifier, 2 - 6 GHz, 100W
The IFI T62-100 RF Microwave TWT Amplifier is specifically engineered for exceptional RF performance in demanding environments. Through a combination of cutting-edge technology and practical design, the T62-100 stands as one of the most reliable amplifiers available in today's market.
Designed with operational safety in mind, this amplifier is user-friendly and incorporates a comprehensive suite of protection systems. These features include:
- Over-current and Voltage Protection
- Redundant Thermal and Airflow Sensors to prevent overheating
The modern interface enhances ease of use, with a modular structure minimizing internally produced EMI signal leakage. This design not only facilitates easy access for field service but also ensures quick turnaround times in depot-level repair facilities.
The backlit LCD screen displays critical information such as:
- Forward/Reverse Power Indication
- Self-Diagnostic Information
All operational parameters are readily available on the front panel display as well as via a remote bus connection. The amplifier allows for easy mode switching for local control when not operated remotely. For computer automation, both RS-232 and IEEE-488 interfaces are seamlessly integrated.
Key Features of the IFI T62-100 TWT Amplifier:
- VSWR Reflected Power Protection: Operates without damage or oscillation into any magnitude of phase or load impedance, including Open and Short Circuit Protection.
- Alternate Prime Power (specify at time of order)
- GPIB IEEE 488 & RS232 Remote Control
- RF Sample Port on the Front Panel; 112R for the rear panel
- Internal Pre-amplification allows rated output power with input levels of 0 dBm or less
- RF Input/Output Connectors positioned on the Front Panel; 118R for the rear panel
- Internal System Diagnostics & Status Indicators
- Filament/Beam Elapsed Time Metering in hours
- RF Safety Interlock for operational safety
- Simultaneous Forward/Reflected Power Indication on the Front Panel display
Specifications of the T62-100:
- Frequency Range: 2 to 6 GHz
- Rated Power: 100 watts (min)
- P1dB Power: 45 watts (min)
- Input / Output Impedance: 50 ohms
- RF Input / Sample Connectors: Type N Female
- RF Output Connector: Type N Female
- Operating Temperature: 0° to 50° C
- Non-operating Temperature: -40° to 70° C (up to 50,000 feet max)
- Humidity: 95% without condensation
- Cooling System: Air cooled, self-contained
- Modulation: All types including AM, FM, and Pulse
- Spurious Outputs: Not specified
