Keithley 2200-60-2 Programmable DC Power Supply, 60V, 2.5A

RENT KEITHLEY 2200-60-2 PROGRAMMABLE DC POWER SUPPLY (Call for Availability)

The Keithley 2200-60-2 Programmable DC Power Supply is an essential tool for the testing and characterization of components, circuits, modules, and complete devices across various settings such as research labs, design and development, and production tests. This versatile single-channel power supply operates as both a constant current source and a constant voltage source, delivering exceptional performance for your electrical testing needs. The device is equipped with a host of features designed to facilitate complex testing and yield rapid results.

Key Features of the Keithley 2200-60-2 Programmable DC Power Supply:

• High output and measurement resolution, tailored for low power circuit testing.
• Remote sensing capability ensures accurate voltage application to the load.
• Dual-line display provides simultaneous visibility of both programmed values and actual outputs, offering continuous monitoring of power delivery.
• Built-in List mode simplifies the creation of repeatable test sequences with up to 80 output steps.
• Standard GPIB and USB interfaces allow for convenient automated control.
• Integrated protective features to safeguard the Device Under Test (DUT) from potential damage.
• Seamlessly switches between constant voltage and constant current operations:
• Current is regulated at the Current Limit setting, while voltage adjusts according to load resistance.
• Timer functionality to deactivate output after a preset duration.
• Front panel lock-out options secure test parameters and settings.
• Applications include:
• Component, circuit, and module testing and characterization.
• Utilization in research laboratories, design and development, or production testing.

Specifications of the Keithley 2200-60-2 Programmable DC Power Supply:

• DC Output Rating:
• Voltage: 0 to 60 V
• Current: 0 to 25 A
• Maximum Power: 150 W
• Load Regulation:
• Voltage: < 0.01% + 2 mV
• Current: < 0.05% + 0.5 mA
• Line Regulation:
• Voltage: < 0.01% + 2 mV
• Current: < 0.05% + 0.05 mA
• Ripple and Noise (20 Hz to 7 MHz):
• Voltage:
• < 1 mV_RMS
• < 5 mV_p-p
• Current: < 3 mA_RMS
• Setting Resolution:
• Voltage: 1 mV
• Current: 0.1 mA
• Setting Accuracy (using remote sense, 25°C ± 5°C):
• Voltage: ± 0.03% + 6 mV
• Current: ± 0.05% + 1.5 mA
• Readback Resolution:
• Voltage: 1 mV
• Current: 0.1 mA
• Readback Accuracy (25°C ± 5°C):
• Voltage: ± 0.02% + 6 mV
• Current: ± 0.05% + 1.5 mA
• Overvoltage Protection:
• Range (typical): 1 V to 59 V
• Accuracy: ± 0.5% + 0.5 V
• Response Time (typical): < 10 ms
• Communications:
• USB: Type B connector, USB-TMC compatible
• GPIB: IEEE-488.2 compliant
• Display: Vacuum fluorescent display
• Memory: 40 setup memories
• List Mode:
• Define up to seven lists, each with up to 80 steps.
• Each step includes both voltage and current limits.
• Continuous sequences can specify durations for each step.
• Output, Sense, Status, and Control: Removable screw terminal block includes:
• Output channel duplicating front panel outputs
• Remote sense lines for accurate voltage application
• Control input: Multifunction TTL input for trigger or digital input/output
• Status output: Multifunction TTL output for fault indication
• Floating Voltage Rating: Up to 100V (DC + peak AC) between earth ground and any output terminal