Keysight / Agilent E4362A Solar Array Simulator DC Module, 130V, 5A, 600W

Agilent / HP E4362A Solar Array Simulator DC Module

The Agilent / HP E4362A is a powerful 600W Solar Array Simulator DC Module engineered to replicate the output characteristics of solar arrays with exceptional precision. This versatile device acts primarily as a current source, featuring remarkably low output capacitance. Its fast I-V curve adjustments empower users to simulate a wide array of solar array outputs under varying environmental conditions such as temperature fluctuations, aging, eclipse effects, and rotational dynamics.

Flexible Operational Modes

The E4362A provides flexibility by allowing operations in two primary modes:

• Input key operational parameters (V_oc, I_sc, V_mp, I_mp) to generate an I-V curve internally.
• Upload a user-defined table to establish bespoke I-V curves for solar arrays.

Key Features and Specifications

Output Ratings:

• Maximum Power: 600 W
• Maximum Open Circuit Voltage: 130 V
• Maximum Voltage Point (V_mp): 120 V
• Maximum Short Circuit Current (I_sc):
  • For Line Voltage 200 V / 230 V / 240 V: 5.0 A
  • For Line Voltage 100 V / 120 V: 2.5 A
• Maximum Circuit Point (I_mp):
  • For Line Voltage 200 V / 230 V / 240 V: 5.0 A
  • For Line Voltage 100 V / 120 V: 2.5 A

Additional Specifications:

• Output Voltage Ripple & Noise:
  • Simulator / Table Mode: 24 mVrms, 195 mVp-p
  • Fixed Mode: 30 mVrms, 150 mVp-p
• Programming Accuracy:
  • Fixed Mode Voltage: 0.075% + 50 mV
  • Fixed Mode Current: 0.2% + 10 mA
• Drift / Temperature Stability:
  • Voltage: 0.04% + 2 mV
  • Current: 0.1% + 0.5 mA
• Transient Performance:
  • Voltage Programming Rise/Fall Time: < 8 ms
  • Settling Time: 25 ms typical
  • Output Current Settling Time: < 5 µs
• Temperature Coefficients:
  • Voltage: 0.01% + 650 µV
  • Current: 0.025% + 125 µA
• Load Regulation:
  • Constant Voltage: 2 mV
  • Constant Current: 1 mA

Additional Functional Capabilities:

• Auto-Parallel Configuration: Up to 4 outputs
• Maximum Reverse Diode Current (with fans running): 5.0 A
• Monotonicity: Output is monotonic over entire rated range
• Output Terminal Isolation: ±240 Vdc

Make Accurate Solar Simulations a Reality

Optimize your solar array testing with the Agilent / HP E4362A, where advanced simulation capabilities meet robust performance. This module is designed to meet the highest standards for solar testing and research applications.