Keysight / Agilent MSOX3024A Oscilloscope, 200 MHz, 4 + 16 Chs., 4 GSa/s

RENT KEYSIGHT MSOX3024A OSCILLOSCOPE (Call for Availability)

The Keysight MSOX3024A is an advanced four-channel oscilloscope from the renowned InfiniiVision 3000 X-Series, designed with cutting-edge technology that revolutionizes the way users engage in diagnostics and signal analysis. This upgradable model offers exceptional performance and versatility, making it an optimal choice for both research and industrial applications. Its innovative 5-instruments-in-one design grants you greater capabilities without straining your budget.

Key Features and Specifications of the Keysight MSOX3024A

Features

• Update Rate: One million waveforms per second
• MegaZoom IV smart memory technology for high-speed data processing
• Large 8.5-inch WVGA display for clear, detailed visual analysis
• Optional segmented memory for efficient data management
• Industry's first 5-in-1 capability, including:
• Oscilloscope
• Digital channels
• Built-in 20 MHz function/arbitrary waveform generator with modulation
• Integrated digital voltmeter
• Protocol analyzer
• Investment protection with the only fully-upgradable oscilloscope, supporting bandwidth enhancements up to 1 GHz
• Leading applications solution within the industry

Specifications

• Bandwidth (-3 dB): 200 MHz
• Calculated rise time (10 - 90%): ≤ 1.75 ns
• Input Channels:
• 4 analog channels
• 16 digital channels
• Maximum Sample Rate:
• 4 GSa/s half channel
• 2 GSa/s all channel
• Maximum Memory Depth:
• Standard: 2 Mpts
• Optional: 4 Mpts
• Segmented memory available
• Display Size: 8.5 WVGA display
• Waveform Update Rate: > 1 million waveforms per second
• Active Probes Supported: Generally two for 4-channel models
• Vertical System Analog Channels:
• Hardware bandwidth limits: Approximately 20 MHz (selectable)
• Input Coupling: AC, DC
• Input Impedance:
• 1 MΩ ± 1% (14 pF)
• 50 Ω ± 1.5%
• Input Sensitivity Range: 1 mV/div to 5 V/div (1 MΩ and 50 Ω)
• Vertical Resolution: 8 bits (measurement resolution is 12 bits with averaging)
• Maximum Input Voltage:
• 300 Vrms, 400 Vpk
• Transient overvoltage: 1.6 kVpk
• With 10:1 probe (N2862A, N2863A, N2890A): 300 Vrms
• Frequency de-rating: 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk
• DC Vertical Accuracy: ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
• DC Vertical Gain Accuracy: ±2.0% full scale
• DC Vertical Offset Accuracy: ±0.1 div ± 2 mV ± 1% of offset setting
• Channel-to-Channel Isolation: > 100:1 from DC to maximum specified bandwidth
• Offset Range:
• ±2 V (1 mV/div to 200 mV/div)
• ±50 V (> 200 mV/div to 5 V/div)
• Vertical System Digital Channels:
• Digital Input Channels: 16 (D0 to D15)
• Thresholds: Per pod adjustable
• Threshold Selections: TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined
• User-Defined Threshold Range: ±8.0 V in 10 mV steps
• Maximum Input Voltage: ±40 V peak, transient overvoltage: 800 Vpk
• Threshold Accuracy: ±(100 mV + 3% of threshold setting)
• Maximum Input Dynamic Range: ±10 V about threshold
• Minimum Voltage Swing: 5 mVpp
• Input Impedance: 100 kΩ ± 2%
• Input Capacitance: ~8 pF
• Vertical Resolution: 1 bit
• Horizontal System Analog Channels:
• Time Base Range: 2 ns/div to 50 s/div
• Time Base Accuracy: 25 ppm ± 5 ppm per year
• Time Base Delay Time Range:
• Pre-trigger: Greater of 1 screen width or 250 µs
• Post-trigger: 1 s to 500 s
• Channel-to-Channel Deskew Range: ±100 ns
• Δ Time Accuracy (using cursors): ±(time base accuracy × reading) ± (0.0016 × screen width) ± 100 ps
• Modes: Main, zoom, roll, XY
• XY Mode:
• Available on channels 1 and 2 only, Z Blanking on external trigger input
• Maximum Bandwidth: Full bandwidth
• Phase Error at 1 MHz: < 0.5 degree
• Horizontal System Digital Channels:
• Minimum Detectable Pulse Width: 5 ns
• Channel-to-Channel Skew:
• 2 ns (typical)
• 3 ns (maximum)
• Acquisition System:
• Maximum Analog Channels Sample Rate:
• 4 GSa/s half channel interleaved
• 2 GSa/s all channel
• Maximum Analog Channels Record Length:
• 2 Mpts half channel interleaved, 1 Mpts all channel (standard)
• 4 Mpts half channel interleaved, 2 Mpts all channel (optional)
• Maximum Duration of Time Captured at Highest Sampling Rate (all analog channels): 500 µs with 4M memory upgrade
• Maximum Digital Channels Sample Rate: 1 GSa/s
• Maximum Digital Channels Record Length:
• 1 Mpts (standard)
• 2 Mpts (optional)
• Modes:
• Normal: Default mode operation
• Peak Detect: Captures glitches as narrow as 250 ps
• Averaging: Selectable from 2 up to 65,536
• High Resolution: Boxcar averaging for noise reduction; offers 12 bits of resolution
• Segmented: Maximizes memory for data streams with long intervals of inactivity
• Trigger System:
• Trigger Sources: Analog channel (1-4), digital channel (D0-D15), line, external, WaveGen
• Trigger Modes:
• Normal: Requires trigger for operation
• Auto: Automatically triggers in the absence of an event
• Single: Triggers once, waiting for further action
• Force: Front panel button for immediate triggering
• Trigger Coupling:
• DC: DC coupled
• AC: Cutoff frequency: < 10 Hz
• High Frequency Reject: ~ 50 kHz
• Low Frequency Reject: ~ 50 kHz
• Noise Reject: Allows sensitivity adjustments
• Trigger Holdoff Range: 40 ns to 10.00 s
• Trigger Sensitivity:
• Internal: < 10 mV/div triggers at 1 div or 5 mV
• External: 200 mVpp from DC to 100 MHz; 350 mVpp from 100 MHz to 200 MHz
• Trigger Level Range:
• Any channel: ±6 div from center
• External: ±8 V