Power Ten P63C-101000D Power Supply
The Power Ten P63C-101000D is an exceptional solution within the P63C series, designed specifically for high power DC voltage applications. This unit is ideally suited for diverse sectors, including:
- Automated Test Equipment (ATE)
- Research and Laboratory Use
This power supply utilizes advanced switching technology, including pulse width modulation (PWM) and zero crossing topology, ensuring reliable, efficient, and economical performance.
Key Features and Specifications
- Output: 10V, 1000A, 50mV Output Peak-to-Peak Ripple
- Input Voltage: 190-253 VAC, 47-63 Hz
- Input Current @ 208 VAC (Typical): 41 A at 10.0 kW Output (Operates from Delta or Wye Source)
- Dimensions: 19" (W) x 5.25" (H) x 22" (D)
- AC Input Interface: 3 wire + GND (#10-32 threaded studs) for 208 VAC
- DC Output Interface: Bus bars with 0.390" interface holes for output =50 VDC
- Control/Monitor Interface: DB 25-pin female connector
- Regulation: Voltage: 0.1% of maximum rated output; Current: 0.5% of maximum rated output
- Transient Response: A 30% current step load will recover to within ±2% of set voltage within 10 msec
- Stability: ±0.05% of set point per 8 hours after 30 minutes warm-up at fixed line, load, and temperature
- Temperature Coefficient: Voltage: 0.02%/°C; Current: 0.03%/°C
- Operating Temperature: 0 to +50°C, No derating
- Storage Temperature: -20 to +70°C
- Front Panel Controls: On/Off switch, DC volts adjust, DC amps adjust, OVP preset adjust
- Meters/Indicators: LCD DC voltmeter, ammeter, and OVP limit set; LED indicators for voltage mode, current mode, OVP fault, and fault
- Built-In Protection: Over Voltage, Current limit Fold back, Over Temperature, Brown Out, Turn On Surge Limit, Slow Start
- Remote Control/Monitoring (Rear Panel): On/Off control via contact closure, 6-120 VDC, TTL or CMOS switch, output voltage and current monitor, OVP limit set, summary fault status
- Remote Programming: Voltage (0 to 100%) Current (0 to 100%); Resistive: 0-5K ohms; Voltage: 0-5 VDC or 10 VDC
- Remote Sensing: Terminals provided to sense output voltage at load
- Operational Features: Master/Slave, Series, Parallel configurations available
