Power Ten P63C-10660D Power Supply, 10V, 660A, 10kW

Do you have a Power Ten P63C-10660D Power Supply, 10V, 660A, 10kW you want to sell?

We buy used equipment! Learn about selling

Manufactured by: Power Ten

Category: DC Power Supplies, Low Voltage (less than 60V), High Current (60A and up)

Power Ten P63C-10660D

The Power Ten P63C-10660D from the P63C series represents an advanced solution for high power DC voltage applications in various sectors including semiconductor burn-in systems. This robust power supply is engineered to meet demanding technical requirements across multiple domains:

Process Control

Medical Systems

Production Test

Electromagnets

Battery Chargers

Ion Implant

Radar Systems

High Power Lasers

Research / Labs

Employing the latest in reliable and efficient switching technology, the Power Ten P63C-10660D features pulse width modulation (PWM) and zero crossing topology, facilitating both high efficiency and compact design.

Key Specifications:

Output: 10V, 660A, with 50mV Output P-P Ripple

Input Voltage: 190-253 VAC, 47-63 Hz

Input Current @ 208 VAC: 41 A at 10.0 kW Output (Operates from Delta or Wye Source)

Dimensions: 19" (W) X 5.25" (H) X 22" (D)

AC Input Interface: 3 wire + GND (#10-32 threaded studs) (208 VAC)

DC Output Interface: Standard configuration

Control/Monitor Interface: DB 25-pin female connector

Regulation: Voltage: 0.1% of maximum rated output; Current: 0.5% of maximum rated output

Transient Response: A 30% current step load will recover to within ±2% of set voltage within 10 msec

Stability: ±0.05% of set point per 8 hours after 30 minutes warm-up under fixed line, load, and temperature

Temperature Coefficient: 0.02%/°C of rated output voltage; 0.03%/°C of rated output current

Operating Temperature: 0 to +50°C, No derating

Storage Temperature: -20 to +70°C

Cooling: Internal fans

Controls (Front Panel): On/Off switch, DC volts adjust, DC amps adjust, OVP preset adjust (limit set)

Meters/Indicators: LCD DC voltmeter, ammeter, OVP limit set; LED indicators for voltage mode, current mode, OVP fault, and general fault

Built-In Protection: Over Voltage, Current limit Fold back, Over Temperature, Brown Out, Turn On Surge Limit, Slow Start

Remote Control/Monitor (Rear Panel): On/Off control via contact closure, 6-120 VDC, TTL or CMOS switch; output voltage and current monitor, OVP limit set, summary fault status