Power Ten P63C-12.5800D
The Power Ten P63C-12.5800D is engineered to deliver unparalleled performance in high-power DC voltage applications, making it a premier choice for semiconductor burn-in systems, medical systems, and various industrial applications. This exceptional power supply is suitable for diverse environments, including:
- Automatic Test Equipment (ATE)
- Research and Laboratory Use
Designed with advanced switching technology, the P63C series utilizes pulse width modulation (PWM) and zero crossing topology, achieving remarkable efficiency and compact packaging. Key features include:
- Output: 12.5V, 800A, 50mV Output P-P Ripple
- Input Voltage: 190-253 VAC, 47-63 Hz
- Input Current @ 208 VAC (Typical): 41 A at 10.0 kW output (operates from Delta or Wye source)
- Dimensions: 19" (W) x 5.25" (H) x 22" (D)
- AC Input Interface: 3 wire + GND (#10-32 threaded studs)
- DC Output Interface: Standard connection for seamless integration
- Control/Monitor Interface: DB 25-pin female connector
- Regulation: Voltage at 0.1% of maximum rated output; Current at 0.5% of maximum rated output
- Transient Response: A 30% current step load recovers to within ±2% of set voltage within 10 ms
- Stability: ±0.05% of set point per 8 hours after 30 minutes warm-up at fixed line, load, and temperature
- Temperature Coefficient: 0.02%/°C of rated output voltage; 0.03%/°C of rated output current
- Operating Temperature: 0 to +50°C (no derating)
- Storage Temperature: -20 to +70°C
- Cooling: Internal fan system for optimal heat management
- Controls (Front Panel): On/Off switch, DC volts adjust, DC amps adjust, OVP preset adjust
- Meters/Indicators: LCD DC voltmeter, ammeter, OVP limit set; LED indicators for mode and fault status
- Built-In Protection: Over Voltage, Current Limit Fold Back, Over Temperature, Brown Out, Turn On Surge Limit, Slow Start
- Remote Control/Monitor (Rear Panel): Contact closure on/off control, output voltage and current monitoring, and OVP limit set
- Remote Programming: Voltage and current programmability with resistive/voltage options
- Remote Sensing: Terminals available for output voltage sensing at load
- Operational Features: Master/Slave, Series, and Parallel configurations supported
