RENT R&S ZVBR Analyzer (call for availability)
The R&S ZVB4 Vector Network Analyzer is engineered for versatile measurements across a broad frequency range from 300 kHz to 4 GHz. This state-of-the-art analyzer excels in facilitating vector network analysis, especially tailored for multiport configurations and balanced component measurements, making it an optimal solution for both development and production environments.
Key Features:
- Multiport Measurement Capabilities:
- Two or four test ports, perfect for intricate multiport and balanced measurements.
- Integrated internal sources for providing RF and LO signals on four-port models, streamlining mixer measurements with a single unit.
- Balanced measurements characterizing balanced Devices Under Test (DUTs) via mixed mode S-parameters.
- Optional automatic calibration units enhance speed and accuracy during calibration.
- Exceptional Specifications:
- Capable of 60001 points per trace for detailed analysis.
- Dynamic range exceeding 123 dB (typical 130 dB), ensuring precision in measurements.
- Power sweep range greater than 50 dB, versatile for various application needs.
- High-Speed Performance:
- Measurement time is less than 4.5 ms for 201 test points during frequency sweeps.
- Channel switching time is under 1 ms, maximizing workflow efficiency.
- Instrument setup switching time is remarkably quick at under 10 ms.
- Data transfer time for 201 test points via RSIB is less than 0.7 ms.
- Capable of simultaneous measurements on multiple DUTs for increased productivity.
- User-Friendly Interface:
- Features a modern, intuitive Windows-based operation, navigable via mouse, hardkeys, and softkeys.
- Supports a large number of channels, traces, and setups, all loaded simultaneously to enhance user experience.
Additional Specifications:
- Test Ports: Options for 2 or 4 ports.
- Measurement Time:
- For 201 test points at 500 kHz IF bandwidth, CW mode.
- Data Transfer Time:
- Via IEC/IEEE bus and VX11 over 100 Mbit/s LAN.
- Via RSIB over 100 Mbit/s LAN.
- Dynamic Range:
- Between Test Ports (specified): >123 dB.
- Between Test Ports (typical): >133 dB.
- Output Power at Test Port: Greater than 13 dBm, typically 15 dBm.
- IF Bandwidths: Ranging from 1 Hz to 500 kHz.
- Operating System: Windows XP Embedded for reliable software support.
Test Set Configuration:
The test set comprises independent reflectometer units for each test port, inclusive of a generator path, measurement receiver, and reference receiver. This innovative architecture omits the need for electronic switches for measurement path transitions, enhancing measurement efficiency. The modular reflectometer design allows for parallel measurement capabilities across various DUTs or port configurations, significantly maximizing measurement throughput.
Performance Optimization:
The R&S ZVB4 utilizes a revolutionary mixing concept prevalent in the R&S ZVR series. With an impressive dynamic range typically reaching 130 dB and minimal trace noise, the analyzer is capable of high-performance measurements even with large measurement bandwidths. The electronically adjustable test port output power exceeds 50 dB, essential for rapid and efficient assessments of nonlinear parameters in active components. DC power inputs are also facilitated through the PORT BIAS 1 to 4 BNC rear-panel connectors, streamlining measurements for low-frequency AC voltages.
