Tektronix DPO3034 Digital Phosphor Oscilloscope

RENT TEKTRONIX DPO3034 Oscilloscope (call for availability)

The Tektronix DPO3034 Digital Phosphor Oscilloscope is engineered to enhance your design debugging efficiency with its robust features and user-friendly design. The oscilloscope boasts a spacious high-resolution WVGA display, enabling you to visualize intricate signal details clearly. With dedicated front-panel controls, operating the DPO3034 is effortless. Plus, the convenient USB host on the front enables quick transfers of screenshots, settings, and waveform data to a memory stick.

Key Features

• Ease of Use:
  • Wave Inspector^® Controls for streamlined waveform navigation and automated search capabilities.
  • 29 Automated Measurements and FFT Analysis for rapid waveform evaluation.
  • TekVPI^® Probe Interface offers automatic scaling and units support for active, differential, and current probes.
  • 9-inch (229 mm) widescreen color display delivers vibrant and detailed visuals.
  • Lightweight and compact design, measuring only 5.8 in. (147 mm) deep and weighing 9 lb. (4 kg).
• Connectivity:
  • Dual USB 2.0 Host Ports on both front and rear for quick data storage and printing, as well as connecting a USB keyboard.
  • Rear USB 2.0 Device Port facilitates easy connections to PCs or direct printing to PictBridge^®-compatible printers.
  • Integrated 10/100 Ethernet Port for network connectivity and Video Out port to connect to external displays.
• Optional Serial Triggering and Analysis:
  • Enhanced capabilities for automated triggering, decoding, and searching across various protocols such as I²C, SPI, CAN, LIN, RS-232/422/485/UART, and I²S/LJ/RJ/TDM.
• Optional Application Support:
  • Advanced capabilities for power analysis and custom video analysis.

Specifications

• Characteristics:
  • Input Channels: 4
  • Analog Bandwidth (-3 dB): 300 MHz
  • Calculated Rise Time (5 mV/div): 1.17 ns
  • Hardware Bandwidth Limits: 20 MHz, 150 MHz
  • Input Coupling: AC, DC, GND
  • Input Impedance: 1 MΩ ±1%, 75 Ω ±1%, 50 Ω ±1%
  • Input Sensitivity Range (1 MΩ): 1 mV/div to 10 V/div
  • Input Sensitivity Range (75 Ω, 50 Ω): 1 mV/div to 1 V/div
  • Vertical Resolution: 8 bits (11 bits with Hi Res)
  • Maximum Input Voltage (1 MΩ): 300 VRMS with peaks = ±450 V
  • Maximum Input Voltage (75 Ω, 50 Ω): 5 VRMS with peaks = ±20 V
  • DC Gain Accuracy:
    • ±1.5% for 5 mV/div and above
    • ±2.0% for 2 mV/div
    • ±2.5% for 1 mV/div
  • Channel-to-Channel Isolation (Any 2 Channels at Equal Vertical Scale):
    • 100:1 at ≤100 MHz
    • 30:1 at >100 MHz up to the rated BW
• Horizontal System Analog Channels:
  • Max Sample Rate: 2.5 GS/s
  • Max Record Length: 5 Mpoints
  • Max Duration of Time Captured at Highest Sample Rate: 2 ms
  • Time-base Range (s/div): 1 ns to 1000 s
  • Time-base Delay Time Range: -10 divisions to 5000 s
  • Channel-to-Channel Deskew Range: ±100 ns
• Trigger System:
  • Main Trigger Modes: Auto, Normal, and Single
  • Trigger Coupling:
    • DC, AC, HF reject (attenuates >50 kHz)
    • LF reject (attenuates low frequencies)
    • Noise reject (reduces sensitivity)
  • Trigger Holdoff Range: 20 ns to 8 s
• Trigger Sensitivity:
  • Internal DC Coupled: 0.5 div from DC to 50 MHz, increasing to 1 div at rated bandwidth
  • External (Auxiliary Input): 200 mV from DC to 50 MHz increasing to 500 mV at 250 MHz
• Trigger Level Range:
  • Any Channel: ±8 divisions from the center of the screen
  • External (Auxiliary Input): ±8 V

Explore More

• Other models in this series:
• Digital Phosphor Oscilloscopes
• Mixed Signal Oscilloscopes