Tektronix DPO7054 Oscilloscope, 500 MHz, 20 GS/s, 4 Ch.

RENT TEKTRONIX DPO7054 Oscilloscope (call for availability)

The Tektronix DPO7054 is a leading-edge real-time digital phosphor oscilloscope designed to tackle the complex signal integrity challenges faced by electronic designers. This oscilloscope stands out for its exceptional signal acquisition and analysis capabilities, user-friendly interface, and advanced debugging tools, making it an indispensable instrument for verifying, characterizing, debugging, and testing sophisticated electronic designs.

With the industry's largest display and an intuitive touch-screen interface, the DPO7054 allows users to access comprehensive data quickly and effectively, streamlining daily tasks in any electronic design workflow.

Features and Specifications of the Tektronix DPO7054 Oscilloscope include:

• 500 MHz Bandwidth Model ideal for both Serial and Digital Applications.
• Up to 40 GS/s Real-time Sample Rate on one channel and up to 10 GS/s on all four channels.
• Record Length of up to 500 Megasamples with MultiView Zoom™ for rapid navigation.
• Over 250,000 waveform capture rate (wfms/s) for maximum efficiency.
• FastFrame™ segmented memory acquisition allows up to 310,000 waveforms per second.
• User-selectable bandwidth limit filters enhance low-frequency measurement accuracy.
• MyScope® custom windows and right-click menus boost operational efficiency.
• Event Search and Mark feature for pinpointing specific events within waveforms.
• Pinpoint® Triggering, offering over 1400 combinations for high-performance triggering.
• Stunning 12.1” XGA Display with touch-screen capability.
• Supports Communications Mask Testing and Clock Recovery from serial data streams.
• Offers 64-bit NRZ Serial Pattern Triggering for isolating pattern-dependent effects up to 1.25 Gb/s.
• Low-speed Serial Protocol Triggering and Decode for I²C, SPI, RS-232, CAN, LIN, and FlexRay.
• Technology-specific software solutions facilitate compliance testing for MIPI® D-PHY, Ethernet, USB 2.0, and more.
• OpenChoice® software built on Microsoft Windows XP enables networking and extended analysis capabilities.

Applications:

• Signal integrity, jitter, and timing analysis.
• Verification, debug, and characterization of complex designs.
• Debugging and compliance testing for serial data streams across telecom and datacom sectors.
• Low-speed serial bus design (I²C, SPI, RS-232, CAN, LIN, and FlexRay).
• Transient phenomena investigation.
• Power measurements and analysis.
• Spectral analysis activities.

Characteristics:

• Vertical System:
• Input Channels: 4
• Bandwidth (DSP Bandwidth Enhance): 500 MHz
• Rise Time (DSP Bandwidth Enhance): 460 ps
• Hardware Analog Bandwidth (-3 dB): 500 MHz
• DC Gain Accuracy: ±1% with offset/position set to 0
• Input Coupling: AC, DC, GND
• Input Impedance: 1 MΩ ±1% with 13 pF ±2 pF or 50 Ω ±1%
• Input Sensitivity:
• 1 MΩ: 1 mV/div to 10 V/div
• 50 Ω: 1 mV/div to 1 V/div
• Vertical Resolution: 8 bit (>11 bit with Hi Res)
• Max Input Voltage:
• 1 MΩ: ±150 V CAT I, derating at 20 dB/decade above 200 kHz
• 50 Ω: 5 VRMS with peak limits under ±24 V
• Time Base System:
• Time Base Range: 50 ps/div to 1000 s/div
• Time Resolution: 500 fs (ET/IT mode)
• Delta Time Measurement Accuracy: ((0.06/sample rate) + (2.5 ppm × Reading)) RMS
• Acquisition System:
• Real-Time Sample Rates:
• 1 Channel: 20 GS/s
• 2 Channels: 10 GS/s
• 3-4 Channels: 5 GS/s
• Maximum Record Length Per Channel:
• Standard: 1 Channel: 50 M, 2 Channel: 25 M, 4 Channel: 12.5 M

Other models in this series:

• Tektronix DPO7104 Oscilloscope
• Tektronix DPO7254 Oscilloscope
• Tektronix DPO7354 Oscilloscope