Tektronix DPO7254 Oscilloscope

RENT TEKTRONIX DPO7254 Oscilloscope (call for availability)

The Tektronix DPO7254 Oscilloscope is the premier real-time digital phosphor oscilloscope designed to tackle the most complex signal integrity issues faced by engineers during verification, characterization, debugging, and testing of advanced electronic designs. Recognized for its exceptional performance in signal acquisition and analysis, this oscilloscope combines operational simplicity with powerful debugging tools to enhance productivity.

Key Features and Specifications

Features and Benefits:

• 3.5 GHz Bandwidth Model catering to both Serial and Digital Applications
• Real-time Sample Rate of up to 40 GS/s on One Channel and 10 GS/s on All Four Channels
• Record Length of up to 500 Megasamples featuring MultiView Zoom™ for convenient data navigation
• Maximum Waveform Capture Rate exceeds 250,000 wfms/s
• FastFrame™ Segmented Memory Acquisition Mode allows up to 310,000 Waveforms per Second
• User-selectable Bandwidth Limit Filters enhance Low-frequency Measurement Accuracy
• MyScope® Custom Windows and Right Mouse Click Menus streamline operational efficiency
• Event Search and Mark feature to quickly locate specific events within waveforms
• Pinpoint® Triggering provides over 1400 combinations for versatile triggering scenarios
• 12.1” XGA Touch Screen Display delivers an expansive visual interface
• Communications Mask Testing capabilities
• Efficient Clock Recovery from Serial Data Streams
• 64-bit NRZ Serial Pattern Trigger for isolating pattern-dependent effects up to 1.25 Gb/s
• Low-speed Serial Protocol Triggering and Decoding (I²C, SPI, RS-232, CAN, LIN, and FlexRay)
• Technology-specific Software Solutions foster built-in expertise for MIPI® D-PHY, Ethernet, USB 2.0 Compliance Testing, Jitter, Timing, Eye Diagram, Power, and DDR Memory Bus Analysis
• OpenChoice® Software integrated with Microsoft Windows XP enables networking and advanced analysis functionalities

Applications:

• Signal Integrity, Jitter, and Timing Analysis
• Debug, Verification, and Characterization of Complex Designs
• Compliance Testing for Serial Data Streams in Telecom and Datacom Sectors
• Low-speed Serial Bus Design (I²C, SPI, RS-232, CAN, LIN, and FlexRay)
• Transient Phenomena Investigation
• Power Measurements and Analysis
• Spectral Analysis

Technical Characteristics:

Vertical System:

• Input Channels: 4
• Bandwidth (DSP Bandwidth Enhance): 3.5 GHz
• Rise Time (DSP Bandwidth Enhance): 115 ps
• Hardware Analog Bandwidth (-3 dB): 2.5 GHz
• DC Gain Accuracy: ±1% with offset/position set to 0
• Input Coupling: AC, DC, GND
• Input Impedance (Software selectable): 1 MΩ ±1% with 13 pF ±2 pF or 50 Ω ±1%
• Input Sensitivity:
  • 1 MΩ: 1 mV/div to 10 V/div
  • 50 Ω: 1 mV/div to 1 V/div
• Vertical Resolution: 8 bit (>11 bit with Hi Res)
• Max Input Voltage:
  • 1 MΩ: ±150 V CAT I, with derating at 20 dB/decade above 200 kHz
  • 50 Ω: 5 VRMS with peak less than ±24 V

Time Base System:

• Time Base Range: 25 ps/div to 1000 s/div
• Channel-to-Channel Deskew: Range ±75 ns

Acquisition System:

• Real-Time Sample Rates:
  • 1 Channel (Max): 40 GS/s
  • 2 Channels (Max): 20 GS/s
  • 3-4 Channels (Max): 10 GS/s
• Maximum Record Length Per Channel:
  • Standard Configuration:
    • 1 Channel: 50 M
    • 2 Channel: 25 M
    • 4 Channel: 12.5 M