Tektronix DPO7354 Oscilloscope, 3.5 GHz, 40 GS/s, 4 Ch.

RENT TEKTRONIX DPO7354 Oscilloscope (call for availability)

The Tektronix DPO7354 Oscilloscope is a state-of-the-art real-time digital phosphor oscilloscope specifically engineered to tackle the intricate signal integrity challenges that designers face while verifying, characterizing, debugging, and testing cutting-edge electronic designs.

With superior signal acquisition and analysis capabilities, the DPO7354 excels in operational simplicity and provides unparalleled debugging tools that streamline your daily tasks. Featuring the largest screen in its class, the oscilloscope’s intuitive user interface allows for effortless data navigation and maximizes the amount of displayed information.

Key Features and Specifications of the Tektronix DPO7354 Oscilloscope include:

Features and Benefits:
• 3.5 GHz Bandwidth suitable for Serial and Digital Applications
• Up to 40 GS/s Real-time Sample Rate on One Channel and up to 10 GS/s on All Four Channels
• Up to 500 Megasamples Record Length with MultiView Zoom™ for swift navigation
• Maximum Waveform Capture Rate exceeding 250,000 wfms/s
• FastFrame™ Segmented Memory Acquisition Mode supporting up to 310,000 Waveforms per Second
• User-selectable Bandwidth Limit Filters for enhanced low-frequency measurement accuracy
• MyScope® Custom Windows and Right Mouse Click Menus improve operational efficiency
• Event Search and Mark function to easily locate specific events within waveforms
• Pinpoint® Triggering offers over 1400 combinations for adaptable and high-performance triggering
• 12.1” XGA Display with Touch Screen interface for enhanced user interaction
• Communications Mask Testing for signal integrity analysis
• Clock Recovery techniques from Serial Data Streams
• 64-bit NRZ Serial Pattern Trigger capable of isolating pattern-dependent effects up to 1.25 Gb/s
• Low-speed Serial Protocol Triggering and Decoding for I²C, SPI, RS-232, CAN, LIN, and FlexRay protocols
• Technology-specific Software Solutions providing built-in domain expertise for MIPI® D-PHY, Ethernet, USB 2.0 Compliance Testing, Jitter, Timing, Eye Diagram, Power, DDR Memory Bus Analysis, and more
• OpenChoice® Software with Microsoft Windows XP OS facilitating built-in networking and extensive analysis

Applications:

• Signal Integrity, Jitter, and Timing Analysis
• Verification, Debugging, and Characterization of Advanced Designs
• Debugging and Compliance Testing of Serial Data Streams adhering to Telecom and Datacom Industry Standards
• Low-speed Serial Bus Design including I²C, SPI, RS-232, CAN, LIN, and FlexRay
• Investigation of Transient Phenomena
• Power Measurements and Analysis
• Spectral Analysis

Characteristics:

• Vertical System:
• Input Channels: 4
• Bandwidth (DSP Bandwidth Enhance): 3.5 GHz
• Rise Time (DSP Bandwidth Enhance): 115 ps
• Hardware Analog Bandwidth (-3 dB): 2.5 GHz
• Typical Rise Time (10% to 90%): 145 ps
• Typical Rise Time (20% to 80%): 95 ps
• DC Gain Accuracy: ±1% with offset/position set to 0
• Input Coupling: AC, DC, GND
• Input Impedance (Software selectable):
• 1 MO ±1% with 13 pF ±2 pF or
• 50 O ±1%
• Input Sensitivity:
• 1 MO: 1 mV/div to 10 V/div
• 50 O: 1 mV/div to 1 V/div
• Vertical Resolution: 8 bit (>11 bit with Hi Res)
• Max Input Voltage:
• 1 MO: ±150 V CAT I, derate at 20 dB/decade to 9 VRMS above 200 kHz
• 50 O: 5 VRMS with peaks less than ±24 V
• Position Range: ±5 divisions
• Offset Range:
• 1 mV/div to 50 mV/div: ±1 V
• 50.5 mV/div to 99.5 mV/div: ±(1.5 V – 10 divisions)
• 100 mV/div to 500 mV/div: ±10 V
• 505 mV/div to 995 mV/div: ±(15 V – 10 divisions)
• 1 V/div to 5 V/div: ±100
• 5.05 V/div to 10 V/div: ±(150 V – 10 divisions)
• Offset Accuracy:
• 1 mV/div to 9.95 mV/div: ±0.2% (offset value-position) ±0.1 div ±1.5 mV
• 10 mV/div to 99.5 mV/div: ±0.35% (offset value-position) ±0.1 div ±1.5 mV
• 100 mV/div to 1 V/div: ±0.35% (offset value-position) ±0.1 div ±15 mV
• 1.01 V/div to 10 V/div: ±0.25% (offset value-position) ±0.1 div ±150 mV
• Delay Between Any Two Channels (Typical): 100 ps (50 O, DC coupling and equal V/div at or above 10 mV/div)
• Channel-to-Channel Isolation (Typical):
• ≥100:1 at 100 MHz
• ≥30:1 between 100 MHz and 2.5 GHz
• ＞ 20:1 between 2.5 and 3.5 GHz

• Time Base System:

• Time Base Range: 25 ps/div to 1000 s/div
• Time Resolution (in ET/IT mode): 250 fs
• Time Base Delay Time Range: 5 ns to 250 s
• Channel-to-Channel Deskew: Range ±75 ns
• Delta Time Measurement Accuracy: (0.06 / sample rate) + (2.5 ppm × Reading) RMS
• Trigger Jitter (RMS): 1.5 psRMS (typical) with enhanced triggering OFF
• Jitter Noise Floor:
• Time Base Accuracy: ±2.5 ppm + Aging

• Acquisition System:

• Real-Time Sample Rates:
• 1 Channel (Max): 40 GS/s
• 2 Channels (Max): 20 GS/s
• 3-4 Channels (Max): 10 GS/s
• Equivalent Time Sample Rate (Max): 4 TS/s (for repetitive signals)
• Maximum Record Length Per Channel:
• Standard Configuration:
• 1 Channel: 50 M
• 2 Channel: 25 M
• 4 Channel: 12.5 M
• Record Length Option 2RL:
• 1 Channel: 125 M
• 2 Channel: 50 M
• 4 Channel: 25 M
• Record Length Option 5RL:
• 1 Channel: 250 M
• 2 Channel: 125 M
• 4 Channel: 50 M
• Record Length Option 10RL:
• 1 Channel: 500 M
• 2 Channel: 250 M
• 4 Channel: 125 M

• Maximum Duration at Highest Real-Time Resolution (1 Channel):

• Resolution: 25 ps (40 GS/s)
• Max Duration with Standard Record Length and Sample Rate: 1 ms
• Max Duration with Option 2RL: 2 ms
• Max Duration with Option 5RL: 5 ms
• Max Duration with Option 10RL: 10 ms