Tektronix MSO5034 Mixed Signal Oscilloscope, 350 MHz, 4 + 16 ch., 5 GS/s

RENT TEKTRONIX MSO5034 Oscilloscope (call for availability)

The Tektronix MSO5034 Digital Phosphor Oscilloscope is designed to enhance your debugging capabilities, simplifying the analysis of both mixed-signal and complex designs. With its ability to capture and analyze up to 20 analog and digital signals concurrently, this oscilloscope stands out in its class. Its high bandwidth captures rapid signal changes effortlessly, while a deep record length feature allows long windows of signal activity to be retained, minimizing the chances of missing intermittent events that may elude other scopes.

Features and Specifications of the Tektronix MSO5034 Oscilloscope include:

• Key Features:
  • Wave Inspector® Controls for seamless navigation and automated waveform data search.
  • MyScope® interfaces with custom control windows and intuitive right-click menus.
  • Simplified Waveform Analysis:
    • 53 automated measurements available.
    • Waveform histograms for detailed analysis.
    • FFT analysis included.
    • Capture rates exceeding 250,000 waveforms per second with FastAcq™ technology.
  • TekVPI® Probe Interface compatible with active, differential, and current probes.
  • User-selectable bandwidth limit filters enhance low-frequency measurement accuracy.
  • Advanced triggers with optional visual trigger capabilities.
  • Bright XGA display featuring:
    • 10.4 in. (264 mm) touchscreen.
  • Space-efficient design:
    • Depth of just 8.12 in. (206 mm).
    • Lightweight at under 15 lb. (6.7 kg).
  • Standard removable hard disk drive for easy data management.
• Connectivity:
  • USB 2.0 host ports:
    • 2 on the front panel and 4 on the rear panel for quick data storage, printing, and connecting USB peripherals.
  • USB device port on the rear for easy PC or GPIB connections.
  • Integrated 10/100/1000BASE-T Ethernet port for network connectivity and video output to external monitors or projectors.
  • Powered by Microsoft® Windows 7 64-bit operating system.
  • LXI Class C compliant for ease of integration.
• Optional Serial Triggering and Analysis:
  • Automated serial triggering, decoding, and searching options for various protocols including I2C, SPI, RS-232/422/485/UART, and USB.
  • Vehicle network monitoring capabilities for CAN and LIN protocols.
• Technology Specific Analysis:
  • Software solutions offering built-in insights for Ethernet and USB 2.0 compliance testing, jitter and timing analysis, eye diagrams, and DDR memory bus analysis.
  • Limit and mask testing to provide quick insights into signal characteristics.
• Specifications:
  • Vertical System Analog Channels:
    • Input Channels: 4
    • Analog Bandwidth (-3 dB): 350 MHz
    • Rise Time (calculated): 1 ns
    • DC Gain Accuracy: ±1.5%, derated at 0.10%/°C above 30 °C
    • Effective Number of Bits (typical): 6 bits
    • Random Noise (RMS, sample mode, full BW):
      • 1 MΩ: ≤(130 µV + 8.0% of V/div setting)
      • 50 Ω: ≤(130 µV + 8.0% of V/div setting)
    • Input Coupling: AC, DC
    • Input Impedance:
      • 1 MΩ ±1%
      • 50 Ω ±1%
    • Input Sensitivity:
      • 1 MΩ: 1 mV/div to 10 V/div
      • 50 Ω: 1 mV/div to 1 V/div
    • Vertical Resolution: 8 bits (>11 bits with Hi Res)
    • Maximum Input Voltage, 1MΩ: 300 VRMS CAT II, with peaks = ±425 V
  • Vertical System Digital Channels:
    • Input Channels: 16 Digital (D15 - D0)
    • Thresholds: Per-channel thresholds
    • Threshold Selections: TTL, ECL, User defined
    • User-defined Threshold Range: ±40 V
    • Threshold Accuracy: ±(100 mV + 3% of threshold setting)
  • Horizontal System Analog Channels:
    • Max Sample Rate: 5 GS/s
    • Max Record Length (standard): 12.5 M
    • Max Record Length with options:
      • Opt 2RL: 25M
      • Opt 5RL: 50M
      • Opt 10RL: 125M
    • Time Base Range: 12.5 ps/div to 1000 s/div