Tektronix TDS3032C Digital Phosphor Oscilloscope

RENT TEKTRONIX TDS3032C (call for availability)

The Tektronix TDS3032C Digital Phosphor Oscilloscope combines power and portability in a sleek, battery-capable design, making it an excellent choice for professionals requiring an efficient testing solution. This oscilloscope enhances your ability to analyze complex signals quickly, featuring a rapid continuous waveform capture rate and real-time intensity grading, which enables effective signal visualization and troubleshooting. Its digital real-time (DTR) sampling technology ensures no change in sampling rate when additional channels are activated, simplifying signal debugging and characterization across all channels simultaneously.

Key Features and Specifications

• Ease-of-Use Features:
  • Front-panel USB Host Port for seamless data storage and transfer.
  • 25 Automatic Measurements for enhanced efficiency.
  • Standard FFT functionality for frequency analysis.
  • Multi-language user interface to support diverse users.
  • WaveAlert® for automatic waveform anomaly detection.
  • TekProbe® interface supports various probe types for automatic scaling and units.
• Portable Design:
  • Lightweight at just 7 lb (3.2 kg) for effortless transport.
  • Optional internal battery provides up to 3 hours of operation without line power.
• Application Modules for Specialized Analysis:
  • Advanced AnalyModule for complex analytical tasks.
  • Telecommunications Mask Testing Module for compliance testing.
  • Extended Video Module for video applications.
  • 601 Serial Digital Video Module for specific video testing requirements.
• Applications:
  • Digital design and debugging.
  • Video installation and maintenance.
  • Power supply design validation.
  • Education and training programs.
  • Telecommunications mask testing.
  • Manufacturing test setups.
  • General bench testing requirements.

Specifications

• Key Performance Specifications:
  • Sample Rates up to 5 GS/s across all channels.
  • 10 k standard record length on all channels.
  • Continuous waveform capture rate of 3,600 wfms/s.
  • Comprehensive suite of advanced triggers for precise signal analysis.
• Electrical Characteristics:
  • Bandwidth: 300 MHz.
  • Calculated rise time (typical): 1.2 ns.
  • Input channels: 2.
  • External trigger input included.
  • Sample Rate on each channel: 2.5 GS/s.
  • Record Length: 10 k points.
  • Vertical resolution: 9 bits.
  • Vertical sensitivity:
    • 1 MΩ: 1 mV/div to 10 V/div.
    • 50 Ω: 1 mV/div to 1 V/div.
  • Input coupling: AC, DC, GND.
  • Input impedance: 1 MΩ in parallel with 13 pF or 50 Ω.
  • DC gain accuracy: ±2%.
  • Maximum input voltage:
    • 1 MΩ: 150 VRMS with peaks up to 400 V.
    • 50 Ω: 5 VRMS with peaks up to 30 V.
  • Position range: ±5 div.
  • Bandwidth limit: 20 MHz, 150 MHz.
  • Time base range: 2 ns to 10 s.
  • Time base accuracy: ±20 ppm over any 1 ms time interval.
• Input/Output Interfaces:
  • Ethernet Port: RJ-45 connector, supports 10Base-T LAN.
  • USB Port: Front-panel USB 2.0 host port for USB flash drives.
  • GPIB Port: Supported via optional TDS3GV Communications Module.
  • RS-232-C Port: DB-9 male connector for direct communication; optional with TDS3GV Communications Module.
  • VGA Video Port: DB-15 female connector for external monitor connection; optional with TDS3GV Communications Module.
  • External Trigger Input:
    • BNC connector: Input impedance >1 MΩ in parallel with 17 pF; max input voltage is 150 VRMS.