RENT TEKTRONIX THS3014 (call for availability)
The Tektronix THS3014 Handheld Oscilloscope is your go-to solution for comprehensive analysis and troubleshooting in a variety of fields. This advanced oscilloscope incorporates a range of analytical tools that facilitate rapid validation of device operations and timely issue identification. With its deep record length per channel, this model excels at capturing extensive signal information at elevated sample rates, allowing users to discern minute signal details with precision. The THS3014 is designed for rugged portability, featuring four isolated channels and a robust battery life of up to 7 hours for uninterrupted operation, whether on the workbench or in the field. Integrated USB ports enable seamless data transfer, letting you save settings, screenshots, and waveforms effortlessly to external flash devices or directly to a PC.
Key Features and Specifications of the Tektronix THS3014 Handheld Oscilloscope:
- Features:
- Four fully isolated and floating channels
- 21 built-in automatic measurements
- Waveform Math and FFT Spectral Analysis capabilities
- Cursors for volts, time, frequency, and watts measurements
- Measurement data logging facilitated by TrendPlot™
- Waveform pass/fail limit testing built-in
- Automatic capture of 100 display screens
- 7 hours of continuous battery operation for extended usability
- Designed for analog and digital embedded systems
- Ideal for power devices, power electronics, and power supply design
- Well-suited for automotive and avionics design and maintenance
- Applicable for industrial equipment design and installation
- Perfect for field testing and service
- Specifications:
- Vertical System Analog Channels:
- Isolated input channels: 4
- Analog bandwidth (-3 dB): 100 MHz
- Hardware bandwidth limits: 20 kHz, 20 MHz, or full bandwidth
- Input impedance: 1 MΩ ±1%, 14 pF ±2 pF
- Input sensitivity range: 2 mV/div to 100 V/div
- Vertical resolution: 8 bits
- DC gain accuracy: ±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div
- Max BNC input voltage: (1 MΩ) 300 VRMS CAT III
- Max probe voltage (with standard THP0301-X probe): 300 VRMS CAT III
- Float voltage: 1000 VRMS CAT II / 600 VRMS CAT III
- Trace positioning: ±4 divisions
- Horizontal System:
- Maximum sample rate: 2.5 GS/s (1.25 GS/s for 4 channels)
- Maximum record length (all channels):
- 30,000 points in Roll mode (4 ms to 2 min / div)
- Time-base range (s/div): 5 ns to 4 s
- Delay time range: 1 full screen (12 divisions) pre-trigger or up to 100 screens (1,200 divisions) post-trigger
- Timing accuracy: ±100 ppm + 0.04 div
- Zoom functionality: Horizontally expand or compress a live or stopped waveform
- Automatic Setup:
- Autoset: Single-button, automatic setup for all vertical, horizontal, and trigger systems
- Autorange: Continuous auto-setup that tracks and adjusts to signal changes
- Storage Memory:
- Reference: Up to 4 user-definable reference traces
- Waveform: Stores 30 internal records (4 traces each) with corresponding screen images and setup
- Recording: Store up to 10 internal recordings including:
- A 100-screen replay sequence
- TrendPlot™ measurement recordings
- Screen Image: Store up to 9 internally recognized or 256 BMP images on an external USB drive
- Real-time Clock: Stamp of time and date on all stored data
- Input/Output Ports:
- USB Host Port: Compatible with USB mass storage devices
- USB Device Port: Mini-USB-B connector for oscilloscope control
- Probe Compensator Output:
- Side-panel Output: Amplitude: 1.225 Vp-p; Frequency: 500 Hz
- Kensington-style lock: Side-panel security slot for additional protection
- Software:
- OpenChoice® Desktop:
- Fast, easy communication between a Windows PC and the THS3024 oscilloscope
- Streamlines transfer and saving of settings, waveforms, and screen images
- Power Source:
- Battery: 7-hour, 10.8 V rechargeable Li-Ion battery
- Charging time: Approximately 5 hours
- Line power: AC power adapter/charger rated for 100 V to 240 V AC ±10%
- Power frequency: 50 Hz to 60 Hz
