Thermonics T-2500SE

The Thermonics T-2500SE Precision Temperature Forcing System has redefined excellence in temperature management for a wide range of test applications. Unveiled with superior performance value, the T-2500 series adapts to diverse testing needs with various arm designs and innovative heating and cooling strategies.

Key Features:

• Intelligent Touch-Screen Interface: Experience user-friendly controls and easy navigation with a dynamic touchscreen interface.
• Sophisticated Temperature Cycling:
  • Effortlessly configure temperature profiles, saving and recalling data for future use. Whether you need a straightforward two-temperature setup or a complex 99-step cycle, the T-2500SE accommodates your requirements, including compliance with MIL STD-883C for semiconductor thermal stressing.
• Easy PM and Calibration:
  • Streamlined calibration through guided software screens ensures an efficient process. Comprehensive diagnostic screens simplify the identification of system issues for easy servicing.
• ATE Compatibility (IEEE-488.2): Seamless integration with automated test equipment enhances testing efficiency.
• Efficient Air Dryer: A built-in air dryer enhances performance by removing water vapor and particles, lowering the dew point to approximately -80C.
• ESD Protection: Comprehensive ESD protection secures sensitive components during testing.
• On-Screen Graphics: Display essential information with clarity and precision.
• Precise Temperature Control:
  • The DUT (Device Under Test) can be monitored with K-type or T-type thermocouples, ensuring temperature control within ±1C of the setpoint. The advanced temperature control algorithm guarantees rapid stabilization at the desired temperature.
• Integrated Thermal Test Head and Motorized Arm: Streamlined design integrates all essential components for maximum efficiency.

Specifications:

• Temperature Range: -90C to 225C
• Accuracy: ±1.0C
• Stability: ±0.3C
• Displayed Resolution: 0.1C
• Transition Time: 4 seconds (from +125C to -55C)
• Heater & Cooling Method:
  • Heating: Forced air with in-line air heaters.
  • Cooling: Forced air with single-stage mechanical refrigeration and multi-stage self-cooling heat exchanger using environmentally safe refrigerants.
• Temperature Sensors: DUT K-type and T-type thermocouples, along with K-type thermocouples for air temperature, ensuring precise readings.
• Fail-Safes: Includes snap-disc thermostats, air flow sensors, and thermocouples with an over-temperature limit of 245C.
• AC Input Requirement: 200–230VAC, 50/60 Hz, 1 Phase, 20A
• AIR INPUT REQUIREMENTS:
  • Pressure: 80-110 PSIG (5.7 - 7.8 Kg/Cm2)
  • Flow Rate: 18 SCFM (8.6 liters/sec)
  • Dew Point: Less than 10C at 80 PSIG (5.7 Kg/Cm2)
  • Quality: Clean, oil- and moisture-free air.
• OUTPUT AIR FLOW: 200 to 900 SCFH (1.6 to 7.08 liters/sec), controlled by software.
• Dimensions: 55"H x 25"W x 28"D
• Weight: 350 lbs.