Yokogawa DL850EV ScopeCorder Vehicle Edition

Yokogawa DL850EV ScopeCorder - Vehicle Edition

Revolutionize your measurement capabilities with the Yokogawa DL850EV ScopeCorder, an advanced, modular waveform recording instrument designed for the development, evaluation, and quality control of energy-efficient devices. With its high-speed sampling and robust multichannel measurement capabilities, it is the essential tool for engineers looking to capture a wide array of physical phenomena, including voltage, current, strain, and acceleration.

Key Features of the Yokogawa DL850EV ScopeCorder:

• Modular Flexibility: Select from 17 different input modules and install up to 8 in the ScopeCorder to configure up to 128 channels for customized measurement setups.
• Diverse Measurement Capabilities: Measure voltage, currents, sensor outputs, temperature, vibration/acceleration, strain, frequency, and logic signals (CAN/LIN).
• Enhanced Data Acquisition: High-resolution and high sample rates are achieved with individually isolated and shielded input channels.
• Advanced Mathematical Functions: Conduct trend calculations, including active power, power factor, integrated power, and harmonics using the new power math option.
• Extensive Recording Duration: Capture data continuously for up to 200 days using the expansive 2 GPoint acquisition memory, internal hard disk, or PC hard disk.
• Time Synchronization: Sync data from remote locations using GPS or IRIG time synchronization.
• Giga Zoom Engine II: Effortlessly zoom into 2 billion samples, allowing you to activate two zoom windows while displaying the entire original signal.
• Impressive Speed & Resolution: Features high-speed sampling rates of up to 100 MS/s and resolution up to 16-bit.
• High Isolation Voltage: Provides isolation withstand voltage of up to 1kV with the use of an isolated probe.
• Dual Capture Function:
  • Record at two different sampling rates to capture transients and assess durability under varying conditions.
  • Effectively register chattering at high-speed sampling while checking frequency occurrences at lower sampling rates.

Specifications:

• Input Section: Plug-in module
• Number of Slots: 8 (Max 4 for 720210 modules; Max 2 for 720240, 720241)
• Number of Input Channels:
  • DL850E: 16CH/Slot, 128CH/Unit
  • DL850EV: 120CH/Slot, 336CH/Unit (Max simultaneous display: 64 waveforms x 4 screens)
• Max Recording Length: Dependent on modules and channel configuration
  • Standard: 250 Mpts (1 Ch), 10 Mpts/Ch (16 CH)
  • With M1 Option: 1 Gpts (1 CH), 50 Mpts/CH (16 CH)
  • With M2 Option: 2 Gpts (1 CH), 100 Mpts/CH (16 CH)
• Time Axis Setting Range: 100 ns/div to 10 hours/div in specified steps
• Time Axis Accuracy: ±0.005%
• Trigger Modes: Auto, auto level, normal, single, ON start
• Display: 10.4-inch TFT color LCD monitor, 1024×768 (XGA)
• Storage Options:
  • SD card slot for memory cards up to 16GB
  • USB mass storage device compatibility
  • Built-in 500GB HDD (FAT32)
• Power Specifications:
  • Rated voltage: 100 to 120VAC/220 to 240VAC (automatic switching)
  • Frequency: 50/60Hz
  • Power consumption: 200VA max
• Isolation Specifications:
  • Withstand voltage: 1500V AC for 1 minute
  • Insulation resistance: 10MΩ or higher at 500V DC