Explore the Anritsu S412E LMR Master System
The Anritsu S412E sets a new standard for the installation and maintenance of public safety systems. Leveraging nine generations of innovation, this LMR Master System is not just a tool; it's a multi-functional powerhouse that integrates a high-performance receiver/spectrum analyzer with a sophisticated handheld vector network analyzer and a robust CW/P25/NXDN signal generator, featuring adjustable power settings.
Key Features and Specifications
- Spectrum Analyzer Features:
- Measurements Include:
- Interference Analyzer:
- Frequency Coverage: 9 kHz to 1.6 GHz (optional extension to 6 GHz)
- Dynamic Range: > 95 dB in 10 Hz RBW
- DANL: -152 dBm in 10 Hz RBW
- Phase Noise: -100 dBc/Hz max @ kHz offset at 1 GHz
- Frequency Accuracy:
- 120 ppb standard (25 °C ± 25 °C)
- < 50 ppb after 3 minutes with GPS lock
- Vector Network Analyzer (VNA) Features:
- 1-path, 2-port VNA with quad trace display
- Frequency Coverage: 500 kHz to 1.6 GHz (optional extension to 6 GHz)
- Intuitive Graphical User Interface (GUI) with Touch Screen
- VNA Quality Error Correction for Directivity and Source Match
- Outstanding Calibration Stability (up to 16 hours)
- Arbitrary Data Points up to 4001
- IF Bandwidth Selections: 10 Hz to 100 kHz
- Transmission Dynamic Range: 100 dB
- Sweep Speed: 850 μs/data point
- Land Mobile Radio Signal Analyzer Features:
- Narrowband FM Analog Systems Analysis
- Supported Analyzing Modes:
- P25 Phase 2 (TIA-102, CCAA)
- Frequency Coverage: 100 kHz to 1.6 GHz (optional extension to 6 GHz)
- Internal Signal Generator:
- Output Range: 0 dBm to -130 dBm (spec to -120 dBm)
- Signal Generator Accuracy: 2.0 dB (typical)
- P25/P25p2, NXDN, and ETSI DMR BER Test Patterns Including: 1011 Hz, 1031 Hz, and V.52/0.153
- Duplex Test Capability: Simultaneous analysis and generation of analog or digital LMR signals
- Independent Control of Receive/Transmit Frequencies and Test Patterns
- Additional Capabilities of the Anritsu S412E:
- 3 Hour Battery Operation Time
- High Accuracy Internal Power Meter
- On-Screen LMR Coverage Mapping (Outdoor and Indoor)
- Compliant with MIL-PRF-28800F Class 2 Standards
- Certified for Use in Explosive Atmospheres per MIL-PRF-28800F and MIL-STD-810G
- GPS Tagging for Saved Traces
- USB Data Transfer Capability
- 8.4 Inch Daylight-Viewable TFT LCD Color Resistive Touchscreen - Functional While Wearing Gloves
