Chroma 62012P-600-8 Programmable DC Power Supply 600V, 8A, 1200W

CHROMA 62012P-600-8 POWER SUPPLY

Unlock the full potential of your testing capabilities with the Chroma 62012P-600-8 Programmable DC Power Supply. This state-of-the-art instrument offers a versatile constant power operating envelope that seamlessly provides both high voltage/low current and low voltage/high current all in one device. By streamlining your setup and reducing the necessity for multiple power supplies, the Chroma 62012P-600-8 is ideal for Automated Test Equipment (ATE) and benchtop applications.

Key Features and Specifications of the Chroma 62012P-600-8 Programmable DC Power Supply:

• Features:
  • Enhanced flexibility with a wider range of voltage and current within the power rating.
  • High-speed programming for rapid configuration changes.
  • Precision voltage and current measurements that ensure accuracy.
  • Current sharing capabilities for parallel operation with Master/Slave control setup.
  • Optional LXI interface for modern connectivity.
  • Constant power operating envelope:
    • Delivers higher currents at lower voltages, enhancing operational efficiency.
    • Capable of replacing two to three conventional power supplies.
    • Eliminates the need for separate low and high voltage supplies for various converter tests.
  • High Accuracy Current Readback:
    • Accurate input current measurement without the requirement for external shunts or DMMs.
    • Simplifies bench setups, reducing costs while broadening converter testing capabilities.
  • DC Transients:
    • Programmable control over voltage and current rise and fall times.
    • Capable of generating complex DC transients for advanced testing requirements.
    • Supports automotive transient testing as per ISO16750-2 and shipboard standards DO-160.
  • Output Trigger:
    • Provides precise output trigger capabilities for timing and event capturing.
    • Perfectly suited for ATE systems that need to capture oscilloscope waveforms efficiently.
  • VID Control: Features 8 independent programmable TTL signals for VID and general-purpose logic control.
  • Soft Panels:
    • Includes advanced LabVIEW graphical control panels for intuitive operation.
    • Facilitates simple and efficient control along with data gathering capabilities.
• Specifications:
  • Output Ratings:
    • Output Voltage: 0~600V
    • Output Current: 0~8A
    • Output Power: 1200W
  • Line Regulation:
    • Voltage: 0.01% + 18mV
    • Current: 0.03% + 20mA
  • Load Regulation:
    • Voltage: 0.01% + 50mV
    • Current: 0.03% + 40mA
  • Voltage Measurement:
    • Range: 120V / 600V
    • Accuracy: 0.05% + 0.05% F.S.
  • Current Measurement:
    • Range: 1.6A / 8A
    • Accuracy: 0.1% + 0.1% F.S.
  • Output Noise (0-20MHz):
    • Voltage Ripple (P-P): 180 mV
    • Voltage Ripple (ms): 90 mV
    • Current Ripple (ms): 60 mA
  • OVP Adjustment Range: 110% of Vset to 110% of Vmax
  • Slew Rate Range:
    • Voltage (with USB): 0.01V - 10V/ms
    • Current (with USB): 0.001A - 1A/ms
  • Programming Response Time (Typical):
    • Rise Time (Full & No Load): 60 ms
    • Fall Time: 5 s (maximum)
  • Efficiency: 0.8
  • Drift (8 hours):
    • Voltage: 0.02% of Vmax
    • Current: 0.04% of Imax
  • Temperature Coefficient:
    • Voltage: 0.02% of Vmax / °C
    • Current: 0.04% of Imax / °C
  • Transient Response Time: 3 mS
    • 10% Step Change: 600 mV
    • Voltage Limit @ Series Mode: 800V
  • AC Input Voltage Ranges: 95 to 250Vac