Magna-Power TSD600-72 DC Power Supply, 600V, 72A, 45kW

Magna-Power TSD600-72 High Voltage Power Supply

The Magna-Power TSD600-72 is an advanced high voltage power supply that integrates cutting-edge DC power processing technology with microprocessor embedded control. This innovative unit offers significant advantages in response time, compact design, and cost efficiency. Unlike conventional switching power supplies, the current-fed TS Series is exceptionally tolerant of challenging load conditions, enabling operation under various scenarios, including short-circuit and open-circuit conditions.

Key Features:

• Master/Slave Operation: Supports both parallel and series configurations for enhanced output voltage and current capabilities.
• Dynamic Control: Operates as a voltage or current source based on the user-defined settings and load conditions. The power supply seamlessly transitions between modes as needed.
• Superior Load Tolerance: Designed to handle load fluctuations with rapid response times for reliable performance.

Specifications:

Input:

• AC Input Nominal Voltage: 480 Vac, 3Ø (operating range 432 - 528 Vac)
• Frequency: 50 Hz - 400 Hz (operating range 45 - 440 Hz)
• Power Factor: > 92% at maximum power

Output:

• Output Specifications: 600V, 72A, 45kW
• Ripple: 250 mVrms
• Line Regulation:
  • Voltage Mode: ± 0.004% of full scale
  • Current Mode: ± 0.02% of full scale
• Load Regulation:
  • Voltage Mode: ± 0.01% of full scale
  • Current Mode: ± 0.04% of full scale
• Load Transient Response: 2 ms to recover within ±1% of full scale output with significant load change.
• Efficiency: 88% at full load
• Stability: ± 0.10% for 8 hours post 30 min warm-up
• Isolation:
  • User inputs and outputs referenced to earth ground
  • Maximum input voltage to ground: ±2500 Vac
  • Maximum output voltage to ground: ±1000 Vdc
• Maximum Slew Rate:
  • 100 ms for output voltage and current change from 0 to 63%
  • With High Slew Rate Option (+HS): 4 ms for output voltage and 8 ms for current change from 0 to 63%
• Bandwidth:
  • 3 Hz for remote analog voltage programming and 2 Hz for current programming
  • With High Slew Rate Option (+HS): 60 Hz for voltage and 45 Hz for current programming
• Dimensions: 62.5 x 48 x 31.5 in (158.8 x 121.9 x 80.0 cm)
• Weight: 349 lbs (158.3 kg)

Control:

• Voltage Programming Accuracy: ± 0.075% of full scale voltage
• OVT Programming Accuracy: ± 0.075% of full scale voltage
• Current Programming Accuracy: ± 0.075% of full scale current
• OCT Programming Accuracy: ± 0.075% of full scale current
• Voltage Readback Accuracy: ± 0.2% of full scale voltage
• Current Readback Accuracy: ± 0.2% of full scale current
• External Analog Programming and Monitoring Levels: 0 - 10 Vdc
• External Analog Output Impedances:
  • Voltage output monitoring: 100 Ω
  • Current output monitoring: 100 Ω
  • +10 Vdc reference: 1 Ω
• External Digital Programming and Monitoring Limits:
  • Input: 0 to 5 Vdc, 10k input impedance
  • Output: 0 to 5 Vdc, 5 mA drive capacity
• Remote Sense Limits: 3% maximum voltage drop from output to load
• Period Programming Limits: Minimum period: 10 ms | Maximum period: 9997 sec