Rohde & Schwarz FSQ8 Signal Analyzer

The R&S FSQ8 Signal Analyzer seamlessly combines high-performance signal analysis with the dynamic capabilities of a top-tier spectrum analyzer. With a demodulation bandwidth of up to 120 MHz, it delivers precise and reliable measurements for a variety of applications.

Key Features:

• Frequency Range: 20 Hz to 8 GHz
• Dynamic Range:
  • Third-Order Intercept (TOI): +25 dBm, typical
  • 1 dB Compression Point: +13 dBm, typical
  • 84 dB ACLR/3GPP with noise correction
• Demodulation Bandwidth: 28 MHz (optional 120 MHz)
• Memory: 16 Msample I and Q memory, extendable up to 705 Msample
• Application Firmware for Digital Demodulation:
  • Bluetooth®
  • GSM/EDGE
  • 3GPP WCDMA, HSDPA, TD-SCDMA
  • 3GPP LTE
  • CDMA2000®, 1xEV-DV, 1xEV-DO
  • WLAN 802.11a/b/g/j
  • WiMAX 802.16-2004, 802.16e-2005
  • General Purpose Vector Signal Analysis
• RF Performance:
  • Displayed Average Noise Level (DANL) with preamplifier: < -152 dBm (10Hz)
  • Single Sideband (SSB) Phase Noise: -133 dBc (1Hz) at 10 kHz offset, CF 640 MHz
  • Phase Noise: -160 dBc/Hz @ 10 MHz offset, CF 640 MHz
  • TOI: ±25 dBm
  • 1-dB-compression Point: +13 dBm
  • 3GPP ACLR: 77 dB, 84 dB with noise correction
  • ACLR for 4-carrier scenario: 77 dB with noise correction
• Measurement Accuracy:
  • Total Level Uncertainty: 0.3 dB up to 3.6 GHz
• IQ Downconverter:
  • IF Digitizer: 14 bit 81.6 MHz (20.4 MHz IF)
  • IF Digitizer: 326.4 MHz (optional FSQ-B72)
  • IQ Bandwidth (RF): 28 MHz (up to 120 MHz with FSQ-B72)
  • SFDR: > 80 dB
  • IQ Memory: 16 Msample each I and Q; output via GPIB or LAN
  • Sample Rate: Continuously settable from 10 kHz to 81.6 MHz; e.g., 20 MHz for IEEE802.11a
• Speed:
  • 2.5 ms sweep time in frequency domain
  • 1 µs sweep time in time domain
  • Up to 70 remote measurements/s via GPIB
  • Up to 80 manual measurements/s (screen update)