Tektronix DPO7104 Oscilloscope

RENT Tektronix DPO7104 Oscilloscope (call for availability)

The Tektronix DPO7104 Oscilloscope is a premier real-time digital phosphor oscilloscope, expertly designed to tackle the complex signal integrity issues faced by electronics professionals. From verification and characterization to debugging and testing, this scope is a powerful ally for engineers working on sophisticated electronic designs.

Key Features and Specifications

Boasting unparalleled performance in signal acquisition and analysis, the DPO7104 simplifies operations and enhances debugging with advanced tools. Its expansive industry-leading screen, combined with an intuitive user interface, ensures quick and easy access to vital information.

Features and Benefits

• 1 GHz Bandwidth Model, ideal for Serial and Digital Applications
• Up to 20 GS/s Real-time Sample Rate on One Channel; 10 GS/s on All Four Channels
• MultiView Zoom™ Feature with up to 500 Megasamples Record Length for quick navigation
• Maximum Waveform Capture Rate exceeding 250,000 wfms/s
• FastFrame™ Segmented Memory Acquisition Mode allows for up to 310,000 Waveforms per Second
• User-selectable Bandwidth Limit Filters enhance low-frequency measurement accuracy
• MyScope® Custom Windows and Right Mouse Click Menus for optimized efficiency
• Event Search and Mark feature facilitates easy identification of specific events across entire waveforms
• Pinpoint® Triggering offers versatile and high-performance solutions with over 1400 triggering combinations
• 12.1” XGA Display with Touch Screen for an interactive experience
• Supports Communications Mask Testing
• Clock Recovery from Serial Data Streams to aid data integrity
• 64-bit NRZ Serial Pattern Trigger isolates pattern-dependent effects up to 1.25 Gb/s
• Low-speed Serial Protocol Triggering and Decode (I²C, SPI, RS-232, CAN, LIN, FlexRay)
• Technology-specific Software Solutions cater to MIPI® D-PHY, Ethernet, USB 2.0 Compliance Testing, Eye Diagrams, and more
• OpenChoice® Software with Microsoft Windows XP OS supports built-in networking and extended analysis capabilities

Applications

• Signal Integrity, Jitter, and Timing Analysis
• Verification, Debugging, and Characterization of Complex Designs
• Compliance Testing of Serial Data Streams for Telecom and Datacom Standards
• Design and Debugging of Low-speed Serial Buses (I²C, SPI, RS-232, CAN, LIN, FlexRay)
• Transient Phenomenon Investigations
• Power Measurements and Spectral Analysis

Technical Characteristics

Vertical System

• Input Channels: 4
• Bandwidth: 1 GHz (DSP Bandwidth Enhance)
• Rise Time: 300 ps (Typical)
• DC Gain Accuracy: ±1% at zero offset
• Input Coupling: AC, DC, Ground
• Input Impedance: 1 MΩ ±1% with 13 pF ±2 pF or 50 Ω ±1%
• Input Sensitivity: 1 MΩ: 1 mV/div to 10 V/div; 50 Ω: 1 mV/div to 1 V/div
• Vertical Resolution: 8 bit (greater than 11 bit with High Resolution mode)
• Max Input Voltage: 1 MΩ: ±150 V CAT I; 50 Ω: 5 VRMS
• Offset Range: ±5 divisions

Time Base System

• Time Base Range: 50 ps/div to 1000 s/div
• Time Resolution: 500 fs (in ET/IT mode)
• Delta Time Measurement Accuracy: ((0.06 / sample rate) + (2.5 ppm × Reading)) RMS
• Trigger Jitter: 1.5 psRMS (typical with enhanced triggering off)

Acquisition System

• Real-Time Sample Rates: Up to 20 GS/s on 1 Channel; 10 GS/s on 2 Channels; 5 GS/s on 3-4 Channels
• Maximum Record Length Per Channel: Up to 250 M based on channel configuration

Explore Other Models

• Tektronix DPO7054 Oscilloscope - 500 MHz, 20 GS/s, 4 Channels
• Tektronix DPO7254 Oscilloscope - 2.5 GHz, 40 GS/s, 4 Channels
• Tektronix DPO7354 Oscilloscope - 3.5 GHz, 40 GS/s, 4 Channels